1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner H3 USB PHY
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  "#phy-cells":
15    const: 1
16
17  compatible:
18    enum:
19      - allwinner,sun8i-h3-usb-phy
20      - allwinner,sun50i-h616-usb-phy
21
22  reg:
23    items:
24      - description: PHY Control registers
25      - description: PHY PMU0 registers
26      - description: PHY PMU1 registers
27      - description: PHY PMU2 registers
28      - description: PHY PMU3 registers
29
30  reg-names:
31    items:
32      - const: phy_ctrl
33      - const: pmu0
34      - const: pmu1
35      - const: pmu2
36      - const: pmu3
37
38  clocks:
39    items:
40      - description: USB OTG PHY bus clock
41      - description: USB Host 0 PHY bus clock
42      - description: USB Host 1 PHY bus clock
43      - description: USB Host 2 PHY bus clock
44
45  clock-names:
46    items:
47      - const: usb0_phy
48      - const: usb1_phy
49      - const: usb2_phy
50      - const: usb3_phy
51
52  resets:
53    items:
54      - description: USB OTG reset
55      - description: USB Host 1 Controller reset
56      - description: USB Host 2 Controller reset
57      - description: USB Host 3 Controller reset
58
59  reset-names:
60    items:
61      - const: usb0_reset
62      - const: usb1_reset
63      - const: usb2_reset
64      - const: usb3_reset
65
66  usb0_id_det-gpios:
67    maxItems: 1
68    description: GPIO to the USB OTG ID pin
69
70  usb0_vbus_det-gpios:
71    maxItems: 1
72    description: GPIO to the USB OTG VBUS detect pin
73
74  usb0_vbus_power-supply:
75    description: Power supply to detect the USB OTG VBUS
76
77  usb0_vbus-supply:
78    description: Regulator controlling USB OTG VBUS
79
80  usb1_vbus-supply:
81    description: Regulator controlling USB1 Host controller
82
83  usb2_vbus-supply:
84    description: Regulator controlling USB2 Host controller
85
86  usb3_vbus-supply:
87    description: Regulator controlling USB3 Host controller
88
89required:
90  - "#phy-cells"
91  - compatible
92  - clocks
93  - clock-names
94  - reg
95  - reg-names
96  - resets
97  - reset-names
98
99additionalProperties: false
100
101examples:
102  - |
103    #include <dt-bindings/gpio/gpio.h>
104    #include <dt-bindings/clock/sun8i-h3-ccu.h>
105    #include <dt-bindings/reset/sun8i-h3-ccu.h>
106
107    phy@1c19400 {
108        #phy-cells = <1>;
109        compatible = "allwinner,sun8i-h3-usb-phy";
110        reg = <0x01c19400 0x2c>,
111              <0x01c1a800 0x4>,
112              <0x01c1b800 0x4>,
113              <0x01c1c800 0x4>,
114              <0x01c1d800 0x4>;
115        reg-names = "phy_ctrl",
116                    "pmu0",
117                    "pmu1",
118                    "pmu2",
119                    "pmu3";
120        clocks = <&ccu CLK_USB_PHY0>,
121                 <&ccu CLK_USB_PHY1>,
122                 <&ccu CLK_USB_PHY2>,
123                 <&ccu CLK_USB_PHY3>;
124        clock-names = "usb0_phy",
125                      "usb1_phy",
126                      "usb2_phy",
127                      "usb3_phy";
128        resets = <&ccu RST_USB_PHY0>,
129                 <&ccu RST_USB_PHY1>,
130                 <&ccu RST_USB_PHY2>,
131                 <&ccu RST_USB_PHY3>;
132        reset-names = "usb0_reset",
133                      "usb1_reset",
134                      "usb2_reset",
135                      "usb3_reset";
136        usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
137        usb0_vbus-supply = <&reg_usb0_vbus>;
138        usb1_vbus-supply = <&reg_usb1_vbus>;
139        usb2_vbus-supply = <&reg_usb2_vbus>;
140        usb3_vbus-supply = <&reg_usb3_vbus>;
141    };
142