1* AppliedMicro X-Gene PCIe interface
2
3Required properties:
4- device_type: set to "pci"
5- compatible: should contain "apm,xgene-pcie" to identify the core.
6- reg: A list of physical base address and length for each set of controller
7       registers. Must contain an entry for each entry in the reg-names
8       property.
9- reg-names: Must include the following entries:
10  "csr": controller configuration registers.
11  "cfg": PCIe configuration space registers.
12- #address-cells: set to <3>
13- #size-cells: set to <2>
14- ranges: ranges for the outbound memory, I/O regions.
15- dma-ranges: ranges for the inbound memory regions.
16- #interrupt-cells: set to <1>
17- interrupt-map-mask and interrupt-map: standard PCI properties
18	to define the mapping of the PCIe interface to interrupt
19	numbers.
20- clocks: from common clock binding: handle to pci clock.
21
22Optional properties:
23- status: Either "ok" or "disabled".
24- dma-coherent: Present if DMA operations are coherent
25
26Example:
27
28SoC-specific DT Entry:
29
30	pcie0: pcie@1f2b0000 {
31		status = "disabled";
32		device_type = "pci";
33		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
34		#interrupt-cells = <1>;
35		#size-cells = <2>;
36		#address-cells = <3>;
37		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
38			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
39		reg-names = "csr", "cfg";
40		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
41			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
42		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
43			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
44		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
45		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
46				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
47				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
48				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
49		dma-coherent;
50		clocks = <&pcie0clk 0>;
51	};
52
53
54Board-specific DT Entry:
55	&pcie0 {
56		status = "ok";
57	};
58