1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Toshiba Visconti5 SoC PCIe Host Controller
8
9maintainers:
10  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
11
12description:
13  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
14
15allOf:
16  - $ref: /schemas/pci/snps,dw-pcie.yaml#
17
18properties:
19  compatible:
20    const: toshiba,visconti-pcie
21
22  reg:
23    items:
24      - description: Data Bus Interface (DBI) registers.
25      - description: PCIe configuration space region.
26      - description: Visconti specific additional registers.
27      - description: Visconti specific SMU registers
28      - description: Visconti specific memory protection unit registers (MPU)
29
30  reg-names:
31    items:
32      - const: dbi
33      - const: config
34      - const: ulreg
35      - const: smu
36      - const: mpu
37
38  interrupts:
39    maxItems: 1
40
41  clocks:
42    items:
43      - description: PCIe reference clock
44      - description: PCIe system clock
45      - description: Auxiliary clock
46
47  clock-names:
48    items:
49      - const: ref
50      - const: core
51      - const: aux
52
53  num-lanes:
54    const: 2
55
56required:
57  - reg
58  - reg-names
59  - interrupts
60  - "#interrupt-cells"
61  - interrupt-map
62  - interrupt-map-mask
63  - num-lanes
64  - clocks
65  - clock-names
66  - max-link-speed
67
68unevaluatedProperties: false
69
70examples:
71  - |
72    #include <dt-bindings/interrupt-controller/irq.h>
73    #include <dt-bindings/interrupt-controller/arm-gic.h>
74
75    soc {
76        #address-cells = <2>;
77        #size-cells = <2>;
78
79        pcie: pcie@28400000 {
80            compatible = "toshiba,visconti-pcie";
81            reg = <0x0 0x28400000 0x0 0x00400000>,
82                  <0x0 0x70000000 0x0 0x10000000>,
83                  <0x0 0x28050000 0x0 0x00010000>,
84                  <0x0 0x24200000 0x0 0x00002000>,
85                  <0x0 0x24162000 0x0 0x00001000>;
86            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
87            device_type = "pci";
88            bus-range = <0x00 0xff>;
89            num-lanes = <2>;
90            num-viewport = <8>;
91
92            #address-cells = <3>;
93            #size-cells = <2>;
94            #interrupt-cells = <1>;
95            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
96                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
97            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
98            interrupt-names = "intr";
99            interrupt-map-mask = <0 0 0 7>;
100            interrupt-map =
101                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
102                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
103                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
104                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
105            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
106            clock-names = "ref", "core", "aux";
107            max-link-speed = <2>;
108        };
109    };
110...
111