1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Socionext UniPhier PCIe host controller
8
9description: |
10  UniPhier PCIe host controller is based on the Synopsys DesignWare
11  PCI core. It shares common features with the PCIe DesignWare core and
12  inherits common properties defined in
13  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
14
15maintainers:
16  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
17
18allOf:
19  - $ref: /schemas/pci/snps,dw-pcie.yaml#
20
21properties:
22  compatible:
23    enum:
24      - socionext,uniphier-pcie
25
26  reg:
27    minItems: 3
28    maxItems: 4
29
30  reg-names:
31    minItems: 3
32    items:
33      - const: dbi
34      - const: link
35      - const: config
36      - const: atu
37
38  clocks:
39    maxItems: 1
40
41  resets:
42    maxItems: 1
43
44  num-viewport: true
45
46  num-lanes: true
47
48  phys:
49    maxItems: 1
50
51  phy-names:
52    const: pcie-phy
53
54  interrupt-controller:
55    type: object
56    additionalProperties: false
57
58    properties:
59      interrupt-controller: true
60
61      '#interrupt-cells':
62        const: 1
63
64      interrupts:
65        maxItems: 1
66
67required:
68  - compatible
69  - reg
70  - reg-names
71  - clocks
72  - resets
73
74unevaluatedProperties: false
75
76examples:
77  - |
78    bus {
79        gic: interrupt-controller {
80            interrupt-controller;
81            #interrupt-cells = <3>;
82        };
83    };
84
85    pcie: pcie@66000000 {
86        compatible = "socionext,uniphier-pcie";
87        reg-names = "dbi", "link", "config";
88        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
89        #address-cells = <3>;
90        #size-cells = <2>;
91        clocks = <&sys_clk 24>;
92        resets = <&sys_rst 24>;
93        num-lanes = <1>;
94        num-viewport = <1>;
95        bus-range = <0x0 0xff>;
96        device_type = "pci";
97        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
98                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
99        phy-names = "pcie-phy";
100        phys = <&pcie_phy>;
101        #interrupt-cells = <1>;
102        interrupt-names = "dma", "msi";
103        interrupt-parent = <&gic>;
104        interrupts = <0 224 4>, <0 225 4>;
105        interrupt-map-mask = <0 0 0  7>;
106        interrupt-map = <0 0 0  1  &pcie_intc 0>,
107                        <0 0 0  2  &pcie_intc 1>,
108                        <0 0 0  3  &pcie_intc 2>,
109                        <0 0 0  4  &pcie_intc 3>;
110
111        pcie_intc: interrupt-controller {
112            interrupt-controller;
113            #interrupt-cells = <1>;
114            interrupt-parent = <&gic>;
115            interrupts = <0 226 4>;
116        };
117    };
118