1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Samsung SoC series PCIe Host Controller Device Tree Bindings 8 9maintainers: 10 - Marek Szyprowski <m.szyprowski@samsung.com> 11 - Jaehoon Chung <jh80.chung@samsung.com> 12 13description: |+ 14 Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare 15 PCIe IP and thus inherits all the common properties defined in 16 snps,dw-pcie.yaml. 17 18allOf: 19 - $ref: /schemas/pci/snps,dw-pcie.yaml# 20 21properties: 22 compatible: 23 const: samsung,exynos5433-pcie 24 25 reg: 26 items: 27 - description: Data Bus Interface (DBI) registers. 28 - description: External Local Bus interface (ELBI) registers. 29 - description: PCIe configuration space region. 30 31 reg-names: 32 items: 33 - const: dbi 34 - const: elbi 35 - const: config 36 37 interrupts: 38 maxItems: 1 39 40 clocks: 41 items: 42 - description: PCIe bridge clock 43 - description: PCIe bus clock 44 45 clock-names: 46 items: 47 - const: pcie 48 - const: pcie_bus 49 50 phys: 51 maxItems: 1 52 53 vdd10-supply: 54 description: 55 Phandle to a regulator that provides 1.0V power to the PCIe block. 56 57 vdd18-supply: 58 description: 59 Phandle to a regulator that provides 1.8V power to the PCIe block. 60 61 num-lanes: 62 const: 1 63 64 num-viewport: 65 const: 3 66 67required: 68 - reg 69 - reg-names 70 - interrupts 71 - "#address-cells" 72 - "#size-cells" 73 - "#interrupt-cells" 74 - interrupt-map 75 - interrupt-map-mask 76 - ranges 77 - bus-range 78 - device_type 79 - num-lanes 80 - num-viewport 81 - clocks 82 - clock-names 83 - phys 84 - vdd10-supply 85 - vdd18-supply 86 87unevaluatedProperties: false 88 89examples: 90 - | 91 #include <dt-bindings/interrupt-controller/irq.h> 92 #include <dt-bindings/interrupt-controller/arm-gic.h> 93 #include <dt-bindings/clock/exynos5433.h> 94 95 pcie: pcie@15700000 { 96 compatible = "samsung,exynos5433-pcie"; 97 reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>; 98 reg-names = "dbi", "elbi", "config"; 99 #address-cells = <3>; 100 #size-cells = <2>; 101 #interrupt-cells = <1>; 102 device_type = "pci"; 103 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; 104 clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; 105 clock-names = "pcie", "pcie_bus"; 106 phys = <&pcie_phy>; 107 pinctrl-0 = <&pcie_bus &pcie_wlanen>; 108 pinctrl-names = "default"; 109 num-lanes = <1>; 110 num-viewport = <3>; 111 bus-range = <0x00 0xff>; 112 ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, 113 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; 114 vdd10-supply = <&ldo6_reg>; 115 vdd18-supply = <&ldo7_reg>; 116 interrupt-map-mask = <0 0 0 0>; 117 interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; 118 }; 119... 120