1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: MediaTek MT7621 PCIe controller
8
9maintainers:
10  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
11
12description: |+
13  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
14  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
15
16allOf:
17  - $ref: /schemas/pci/pci-bus.yaml#
18
19properties:
20  compatible:
21    const: mediatek,mt7621-pci
22
23  reg:
24    items:
25      - description: host-pci bridge registers
26      - description: pcie port 0 RC control registers
27      - description: pcie port 1 RC control registers
28      - description: pcie port 2 RC control registers
29
30  ranges:
31    maxItems: 2
32
33patternProperties:
34  'pcie@[0-2],0':
35    type: object
36    $ref: /schemas/pci/pci-bus.yaml#
37
38    properties:
39      resets:
40        maxItems: 1
41
42      clocks:
43        maxItems: 1
44
45      phys:
46        maxItems: 1
47
48      phy-names:
49        pattern: '^pcie-phy[0-2]$'
50
51    required:
52      - "#interrupt-cells"
53      - interrupt-map-mask
54      - interrupt-map
55      - resets
56      - clocks
57      - phys
58      - phy-names
59      - ranges
60
61    unevaluatedProperties: false
62
63required:
64  - compatible
65  - reg
66  - ranges
67  - "#interrupt-cells"
68  - interrupt-map-mask
69  - interrupt-map
70  - reset-gpios
71
72unevaluatedProperties: false
73
74examples:
75  - |
76    #include <dt-bindings/gpio/gpio.h>
77    #include <dt-bindings/interrupt-controller/mips-gic.h>
78
79    pcie: pcie@1e140000 {
80        compatible = "mediatek,mt7621-pci";
81        reg = <0x1e140000 0x100>,
82              <0x1e142000 0x100>,
83              <0x1e143000 0x100>,
84              <0x1e144000 0x100>;
85
86        #address-cells = <3>;
87        #size-cells = <2>;
88        pinctrl-names = "default";
89        pinctrl-0 = <&pcie_pins>;
90        device_type = "pci";
91        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
92                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
93        #interrupt-cells = <1>;
94        interrupt-map-mask = <0xF800 0 0 0>;
95        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
96                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
97                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
98        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
99
100        pcie@0,0 {
101            reg = <0x0000 0 0 0 0>;
102            #address-cells = <3>;
103            #size-cells = <2>;
104            device_type = "pci";
105            #interrupt-cells = <1>;
106            interrupt-map-mask = <0 0 0 0>;
107            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
108            resets = <&rstctrl 24>;
109            clocks = <&clkctrl 24>;
110            phys = <&pcie0_phy 1>;
111            phy-names = "pcie-phy0";
112            ranges;
113        };
114
115        pcie@1,0 {
116            reg = <0x0800 0 0 0 0>;
117            #address-cells = <3>;
118            #size-cells = <2>;
119            device_type = "pci";
120            #interrupt-cells = <1>;
121            interrupt-map-mask = <0 0 0 0>;
122            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
123            resets = <&rstctrl 25>;
124            clocks = <&clkctrl 25>;
125            phys = <&pcie0_phy 1>;
126            phy-names = "pcie-phy1";
127            ranges;
128        };
129
130        pcie@2,0 {
131            reg = <0x1000 0 0 0 0>;
132            #address-cells = <3>;
133            #size-cells = <2>;
134            device_type = "pci";
135            #interrupt-cells = <1>;
136            interrupt-map-mask = <0 0 0 0>;
137            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
138            resets = <&rstctrl 26>;
139            clocks = <&clkctrl 26>;
140            phys = <&pcie2_phy 0>;
141            phy-names = "pcie-phy2";
142            ranges;
143        };
144    };
145...
146