1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Apple PCIe host controller
8
9maintainers:
10  - Mark Kettenis <kettenis@openbsd.org>
11
12description: |
13  The Apple PCIe host controller is a PCIe host controller with
14  multiple root ports present in Apple ARM SoC platforms, including
15  various iPhone and iPad devices and the "Apple Silicon" Macs.
16  The controller incorporates Synopsys DesigWare PCIe logic to
17  implements its root ports.  But the ATU found on most DesignWare
18  PCIe host bridges is absent.
19
20  All root ports share a single ECAM space, but separate GPIOs are
21  used to take the PCI devices on those ports out of reset.  Therefore
22  the standard "reset-gpios" and "max-link-speed" properties appear on
23  the child nodes that represent the PCI bridges that correspond to
24  the individual root ports.
25
26  MSIs are handled by the PCIe controller and translated into regular
27  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
28  distributed over the root ports as the OS sees fit by programming
29  the PCIe controller's port registers.
30
31properties:
32  compatible:
33    items:
34      - enum:
35          - apple,t8103-pcie
36          - apple,t6000-pcie
37      - const: apple,pcie
38
39  reg:
40    minItems: 3
41    maxItems: 6
42
43  reg-names:
44    minItems: 3
45    items:
46      - const: config
47      - const: rc
48      - const: port0
49      - const: port1
50      - const: port2
51      - const: port3
52
53  ranges:
54    minItems: 2
55    maxItems: 2
56
57  interrupts:
58    description:
59      Interrupt specifiers, one for each root port.
60    minItems: 1
61    maxItems: 4
62
63  msi-parent: true
64
65  msi-ranges:
66    maxItems: 1
67
68  iommu-map: true
69  iommu-map-mask: true
70
71required:
72  - compatible
73  - reg
74  - reg-names
75  - bus-range
76  - interrupts
77  - msi-controller
78  - msi-parent
79  - msi-ranges
80
81unevaluatedProperties: false
82
83allOf:
84  - $ref: /schemas/pci/pci-bus.yaml#
85  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
86  - if:
87      properties:
88        compatible:
89          contains:
90            const: apple,t8103-pcie
91    then:
92      properties:
93        reg:
94          maxItems: 5
95        interrupts:
96          maxItems: 3
97
98examples:
99  - |
100    #include <dt-bindings/interrupt-controller/apple-aic.h>
101
102    soc {
103      #address-cells = <2>;
104      #size-cells = <2>;
105
106      pcie0: pcie@690000000 {
107        compatible = "apple,t8103-pcie", "apple,pcie";
108        device_type = "pci";
109
110        reg = <0x6 0x90000000 0x0 0x1000000>,
111              <0x6 0x80000000 0x0 0x100000>,
112              <0x6 0x81000000 0x0 0x4000>,
113              <0x6 0x82000000 0x0 0x4000>,
114              <0x6 0x83000000 0x0 0x4000>;
115        reg-names = "config", "rc", "port0", "port1", "port2";
116
117        interrupt-parent = <&aic>;
118        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
119                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
120                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
121
122        msi-controller;
123        msi-parent = <&pcie0>;
124        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
125
126        iommu-map = <0x100 &dart0 1 1>,
127                    <0x200 &dart1 1 1>,
128                    <0x300 &dart2 1 1>;
129        iommu-map-mask = <0xff00>;
130
131        bus-range = <0 3>;
132        #address-cells = <3>;
133        #size-cells = <2>;
134        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
135                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
136
137        power-domains = <&ps_apcie>, <&ps_apcie_gp>, <&ps_pcie_ref>;
138        pinctrl-0 = <&pcie_pins>;
139        pinctrl-names = "default";
140
141        pci@0,0 {
142          device_type = "pci";
143          reg = <0x0 0x0 0x0 0x0 0x0>;
144          reset-gpios = <&pinctrl_ap 152 0>;
145          max-link-speed = <2>;
146
147          #address-cells = <3>;
148          #size-cells = <2>;
149          ranges;
150        };
151
152        pci@1,0 {
153          device_type = "pci";
154          reg = <0x800 0x0 0x0 0x0 0x0>;
155          reset-gpios = <&pinctrl_ap 153 0>;
156          max-link-speed = <2>;
157
158          #address-cells = <3>;
159          #size-cells = <2>;
160          ranges;
161        };
162
163        pci@2,0 {
164          device_type = "pci";
165          reg = <0x1000 0x0 0x0 0x0 0x0>;
166          reset-gpios = <&pinctrl_ap 33 0>;
167          max-link-speed = <1>;
168
169          #address-cells = <3>;
170          #size-cells = <2>;
171          ranges;
172        };
173      };
174    };
175