1* Altera PCIe controller
2
3Required properties:
4- compatible :	should contain "altr,pcie-root-port-1.0"
5- reg:		a list of physical base address and length for TXS and CRA.
6- reg-names:	must include the following entries:
7		"Txs": TX slave port region
8		"Cra": Control register access region
9- interrupt-parent:	interrupt source phandle.
10- interrupts:	specifies the interrupt source of the parent interrupt controller.
11		The format of the interrupt specifier depends on the parent interrupt
12		controller.
13- device_type:	must be "pci"
14- #address-cells:	set to <3>
15- #size-cells:	set to <2>
16- #interrupt-cells:	set to <1>
17- ranges:		describes the translation of addresses for root ports and standard
18		PCI regions.
19- interrupt-map-mask and interrupt-map: standard PCI properties to define the
20		mapping of the PCIe interface to interrupt numbers.
21
22Optional properties:
23- msi-parent:	Link to the hardware entity that serves as the MSI controller for this PCIe
24		controller.
25- bus-range:	PCI bus numbers covered
26
27Example
28	pcie_0: pcie@0xc00000000 {
29		compatible = "altr,pcie-root-port-1.0";
30		reg = <0xc0000000 0x20000000>,
31			<0xff220000 0x00004000>;
32		reg-names = "Txs", "Cra";
33		interrupt-parent = <&hps_0_arm_gic_0>;
34		interrupts = <0 40 4>;
35		interrupt-controller;
36		#interrupt-cells = <1>;
37		bus-range = <0x0 0xFF>;
38		device_type = "pci";
39		msi-parent = <&msi_to_gic_gen_0>;
40		#address-cells = <3>;
41		#size-cells = <2>;
42		interrupt-map-mask = <0 0 0 7>;
43		interrupt-map = <0 0 0 1 &pcie_0 1>,
44			            <0 0 0 2 &pcie_0 2>,
45			            <0 0 0 3 &pcie_0 3>,
46			            <0 0 0 4 &pcie_0 4>;
47		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
48			    0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
49	};
50