1= Spreadtrum SC27XX PMIC eFuse device tree bindings =
2
3Required properties:
4- compatible: Should be one of the following.
5	"sprd,sc2720-efuse"
6	"sprd,sc2721-efuse"
7	"sprd,sc2723-efuse"
8	"sprd,sc2730-efuse"
9	"sprd,sc2731-efuse"
10- reg: Specify the address offset of efuse controller.
11- hwlocks: Reference to a phandle of a hwlock provider node.
12
13= Data cells =
14Are child nodes of eFuse, bindings of which as described in
15bindings/nvmem/nvmem.txt
16
17Example:
18
19	sc2731_pmic: pmic@0 {
20		compatible = "sprd,sc2731";
21		reg = <0>;
22		spi-max-frequency = <26000000>;
23		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
24		interrupt-controller;
25		#interrupt-cells = <2>;
26		#address-cells = <1>;
27		#size-cells = <0>;
28
29		efuse@380 {
30			compatible = "sprd,sc2731-efuse";
31			reg = <0x380>;
32			#address-cells = <1>;
33			#size-cells = <1>;
34			hwlocks = <&hwlock 12>;
35
36			/* Data cells */
37			thermal_calib: calib@10 {
38				reg = <0x10 0x2>;
39			};
40		};
41	};
42
43= Data consumers =
44Are device nodes which consume nvmem data cells.
45
46Example:
47
48	thermal {
49		...
50		nvmem-cells = <&thermal_calib>;
51		nvmem-cell-names = "calibration";
52	};
53