1* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
2
3Required properties:
4- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac"
5	For backwards compatibility: "st,spear600-gmac" is also supported.
6- reg: Address and length of the register set for the device
7- interrupt-parent: Should be the phandle for the interrupt controller
8  that services interrupts for this device
9- interrupts: Should contain the STMMAC interrupts
10- interrupt-names: Should contain the interrupt names "macirq"
11  "eth_wake_irq" if this interrupt is supported in the "interrupts"
12  property
13- phy-mode: String, operation mode of the PHY interface.
14  Supported values are: "mii", "rmii", "gmii", "rgmii".
15
16Optional properties:
17- mac-address: 6 bytes, mac address
18
19Examples:
20
21	gmac0: ethernet@e0800000 {
22		compatible = "st,spear600-gmac";
23		reg = <0xe0800000 0x8000>;
24		interrupt-parent = <&vic1>;
25		interrupts = <24 23>;
26		interrupt-names = "macirq", "eth_wake_irq";
27		mac-address = [000000000000]; /* Filled in by U-Boot */
28		phy-mode = "gmii";
29	};
30