1* STMicroelectronics 10/100/1000 Ethernet driver (GMAC) 2 3Required properties: 4- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac" 5 For backwards compatibility: "st,spear600-gmac" is also supported. 6- reg: Address and length of the register set for the device 7- interrupt-parent: Should be the phandle for the interrupt controller 8 that services interrupts for this device 9- interrupts: Should contain the STMMAC interrupts 10- interrupt-names: Should contain the interrupt names "macirq" 11 "eth_wake_irq" if this interrupt is supported in the "interrupts" 12 property 13- phy-mode: String, operation mode of the PHY interface. 14 Supported values are: "mii", "rmii", "gmii", "rgmii". 15 16Optional properties: 17- mac-address: 6 bytes, mac address 18 19Examples: 20 21 gmac0: ethernet@e0800000 { 22 compatible = "st,spear600-gmac"; 23 reg = <0xe0800000 0x8000>; 24 interrupt-parent = <&vic1>; 25 interrupts = <24 23>; 26 interrupt-names = "macirq", "eth_wake_irq"; 27 mac-address = [000000000000]; /* Filled in by U-Boot */ 28 phy-mode = "gmii"; 29 }; 30