1Altera SOCFPGA SoC DWMAC controller
2
3This is a variant of the dwmac/stmmac driver an inherits all descriptions
4present in Documentation/devicetree/bindings/net/stmmac.txt.
5
6The device node has additional properties:
7
8Required properties:
9 - compatible	: Should contain "altr,socfpga-stmmac" along with
10		  "snps,dwmac" and any applicable more detailed
11		  designware version numbers documented in stmmac.txt
12 - altr,sysmgr-syscon : Should be the phandle to the system manager node that
13   encompasses the glue register, the register offset, and the register shift.
14 - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
15   for ptp ref clk. This affects all emacs as the clock is common.
16
17Optional properties:
18altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
19		DWMAC controller is connected emac splitter.
20phy-mode: The phy mode the ethernet operates in
21altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
22
23This device node has additional phandle dependency, the sgmii converter:
24
25Required properties:
26 - compatible	: Should be altr,gmii-to-sgmii-2.0
27 - reg-names	: Should be "eth_tse_control_port"
28
29Example:
30
31gmii_to_sgmii_converter: phy@100000240 {
32	compatible = "altr,gmii-to-sgmii-2.0";
33	reg = <0x00000001 0x00000240 0x00000008>,
34		<0x00000001 0x00000200 0x00000040>;
35	reg-names = "eth_tse_control_port";
36	clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
37	clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
38};
39
40gmac0: ethernet@ff700000 {
41	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
42	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
43	reg = <0xff700000 0x2000>;
44	interrupts = <0 115 4>;
45	interrupt-names = "macirq";
46	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
47	clocks = <&emac_0_clk>;
48	clock-names = "stmmaceth";
49	phy-mode = "sgmii";
50	altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
51};
52