1SMSC LAN87xx Ethernet PHY
2
3Some boards require special tuning values. Configure them
4through an Ethernet OF device node.
5
6Optional properties:
7
8- smsc,disable-energy-detect:
9  If set, do not enable energy detect mode for the SMSC phy.
10  default: enable energy detect mode
11
12Examples:
13smsc phy with disabled energy detect mode on an am335x based board.
14&davinci_mdio {
15	pinctrl-names = "default", "sleep";
16	pinctrl-0 = <&davinci_mdio_default>;
17	pinctrl-1 = <&davinci_mdio_sleep>;
18
19	ethernetphy0: ethernet-phy@0 {
20		reg = <0>;
21		smsc,disable-energy-detect;
22	};
23};
24