1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/qcom,ipa.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm IP Accelerator (IPA) 8 9maintainers: 10 - Alex Elder <elder@kernel.org> 11 12description: 13 This binding describes the Qualcomm IPA. The IPA is capable of offloading 14 certain network processing tasks (e.g. filtering, routing, and NAT) from 15 the main processor. 16 17 The IPA sits between multiple independent "execution environments," 18 including the Application Processor (AP) and the modem. The IPA presents 19 a Generic Software Interface (GSI) to each execution environment. 20 The GSI is an integral part of the IPA, but it is logically isolated 21 and has a distinct interrupt and a separately-defined address space. 22 23 See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. See 24 iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU 25 bindings. 26 27 28 - | 29 -------- --------- 30 | | | | 31 | AP +<---. .----+ Modem | 32 | +--. | | .->+ | 33 | | | | | | | | 34 -------- | | | | --------- 35 v | v | 36 --+-+---+-+-- 37 | GSI | 38 |-----------| 39 | | 40 | IPA | 41 | | 42 ------------- 43 44properties: 45 compatible: 46 const: "qcom,sdm845-ipa" 47 48 reg: 49 items: 50 - description: IPA registers 51 - description: IPA shared memory 52 - description: GSI registers 53 54 reg-names: 55 items: 56 - const: ipa-reg 57 - const: ipa-shared 58 - const: gsi 59 60 iommus: 61 maxItems: 1 62 63 clocks: 64 maxItems: 1 65 66 clock-names: 67 const: core 68 69 interrupts: 70 items: 71 - description: IPA interrupt (hardware IRQ) 72 - description: GSI interrupt (hardware IRQ) 73 - description: Modem clock query interrupt (smp2p interrupt) 74 - description: Modem setup ready interrupt (smp2p interrupt) 75 76 interrupt-names: 77 items: 78 - const: ipa 79 - const: gsi 80 - const: ipa-clock-query 81 - const: ipa-setup-ready 82 83 interconnects: 84 items: 85 - description: Interconnect path between IPA and main memory 86 - description: Interconnect path between IPA and internal memory 87 - description: Interconnect path between IPA and the AP subsystem 88 89 interconnect-names: 90 items: 91 - const: memory 92 - const: imem 93 - const: config 94 95 qcom,smem-states: 96 $ref: /schemas/types.yaml#/definitions/phandle-array 97 description: State bits used in by the AP to signal the modem. 98 items: 99 - description: Whether the "ipa-clock-enabled" state bit is valid 100 - description: Whether the IPA clock is enabled (if valid) 101 102 qcom,smem-state-names: 103 $ref: /schemas/types.yaml#/definitions/string-array 104 description: The names of the state bits used for SMP2P output 105 items: 106 - const: ipa-clock-enabled-valid 107 - const: ipa-clock-enabled 108 109 modem-init: 110 type: boolean 111 description: 112 If present, it indicates that the modem is responsible for 113 performing early IPA initialization, including loading and 114 validating firwmare used by the GSI. 115 116 modem-remoteproc: 117 $ref: /schemas/types.yaml#/definitions/phandle 118 description: 119 This defines the phandle to the remoteproc node representing 120 the modem subsystem. This is requied so the IPA driver can 121 receive and act on notifications of modem up/down events. 122 123 memory-region: 124 maxItems: 1 125 description: 126 If present, a phandle for a reserved memory area that holds 127 the firmware passed to Trust Zone for authentication. Required 128 when Trust Zone (not the modem) performs early initialization. 129 130required: 131 - compatible 132 - iommus 133 - reg 134 - clocks 135 - interrupts 136 - interconnects 137 - qcom,smem-states 138 - modem-remoteproc 139 140oneOf: 141 - required: 142 - modem-init 143 - required: 144 - memory-region 145 146additionalProperties: false 147 148examples: 149 - | 150 #include <dt-bindings/interrupt-controller/irq.h> 151 #include <dt-bindings/clock/qcom,rpmh.h> 152 #include <dt-bindings/interconnect/qcom,sdm845.h> 153 154 smp2p-mpss { 155 compatible = "qcom,smp2p"; 156 ipa_smp2p_out: ipa-ap-to-modem { 157 qcom,entry-name = "ipa"; 158 #qcom,smem-state-cells = <1>; 159 }; 160 161 ipa_smp2p_in: ipa-modem-to-ap { 162 qcom,entry-name = "ipa"; 163 interrupt-controller; 164 #interrupt-cells = <2>; 165 }; 166 }; 167 ipa@1e40000 { 168 compatible = "qcom,sdm845-ipa"; 169 170 modem-init; 171 modem-remoteproc = <&mss_pil>; 172 173 iommus = <&apps_smmu 0x720 0x3>; 174 reg = <0x1e40000 0x7000>, 175 <0x1e47000 0x2000>, 176 <0x1e04000 0x2c000>; 177 reg-names = "ipa-reg", 178 "ipa-shared", 179 "gsi"; 180 181 interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, 182 <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, 183 <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 184 <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; 185 interrupt-names = "ipa", 186 "gsi", 187 "ipa-clock-query", 188 "ipa-setup-ready"; 189 190 clocks = <&rpmhcc RPMH_IPA_CLK>; 191 clock-names = "core"; 192 193 interconnects = 194 <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>, 195 <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>, 196 <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>; 197 interconnect-names = "memory", 198 "imem", 199 "config"; 200 201 qcom,smem-states = <&ipa_smp2p_out 0>, 202 <&ipa_smp2p_out 1>; 203 qcom,smem-state-names = "ipa-clock-enabled-valid", 204 "ipa-clock-enabled"; 205 }; 206