1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics ST NCI NFC controller
8
9maintainers:
10  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
11
12properties:
13  compatible:
14    enum:
15      - st,st21nfcb-i2c
16      - st,st21nfcb-spi
17      - st,st21nfcc-i2c
18
19  reset-gpios:
20    description: Output GPIO pin used for resetting the controller
21
22  ese-present:
23    type: boolean
24    description: |
25      Specifies that an ese is physically connected to the controller
26
27  interrupts:
28    maxItems: 1
29
30  reg:
31    maxItems: 1
32
33  spi-max-frequency: true
34
35  uicc-present:
36    type: boolean
37    description: |
38      Specifies that the uicc swp signal can be physically connected to the
39      controller
40
41required:
42  - compatible
43  - interrupts
44  - reg
45  - reset-gpios
46
47if:
48  properties:
49    compatible:
50      contains:
51        enum:
52          - st,st21nfcb-i2c
53          - st,st21nfcc-i2c
54then:
55  properties:
56    spi-max-frequency: false
57else:
58  required:
59    - spi-max-frequency
60
61additionalProperties: false
62
63examples:
64  - |
65    #include <dt-bindings/gpio/gpio.h>
66    #include <dt-bindings/interrupt-controller/irq.h>
67
68    i2c {
69        #address-cells = <1>;
70        #size-cells = <0>;
71
72        nfc@8 {
73            compatible = "st,st21nfcb-i2c";
74            reg = <0x08>;
75
76            interrupt-parent = <&gpio5>;
77            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
78            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
79
80            ese-present;
81            uicc-present;
82        };
83    };
84
85  - |
86    #include <dt-bindings/gpio/gpio.h>
87    #include <dt-bindings/interrupt-controller/irq.h>
88
89    spi {
90        #address-cells = <1>;
91        #size-cells = <0>;
92
93        nfc@0 {
94            compatible = "st,st21nfcb-spi";
95            reg = <0>;
96
97            spi-max-frequency = <4000000>;
98
99            interrupt-parent = <&gpio5>;
100            interrupts = <2 IRQ_TYPE_EDGE_RISING>;
101            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
102
103            ese-present;
104            uicc-present;
105        };
106    };
107