1* Marvell Armada 370 / Armada XP Ethernet Controller (NETA) 2 3Required properties: 4- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta". 5- reg: address and length of the register set for the device. 6- interrupts: interrupt for the device 7- phy: See ethernet.txt file in the same directory. 8- phy-mode: See ethernet.txt file in the same directory 9- clocks: List of clocks for this device. At least one clock is 10 mandatory for the core clock. If several clocks are given, then the 11 clock-names property must be used to identify them. 12 13Optional properties: 14- tx-csum-limit: maximum mtu supported by port that allow TX checksum. 15 Value is presented in bytes. If not used, by default 1600B is set for 16 "marvell,armada-370-neta" and 9800B for others. 17- clock-names: List of names corresponding to clocks property; shall be 18 "core" for core clock and "bus" for the optional bus clock. 19 20 21Example: 22 23ethernet@d0070000 { 24 compatible = "marvell,armada-370-neta"; 25 reg = <0xd0070000 0x2500>; 26 interrupts = <8>; 27 clocks = <&gate_clk 4>; 28 tx-csum-limit = <9800> 29 status = "okay"; 30 phy = <&phy0>; 31 phy-mode = "rgmii-id"; 32}; 33