14de02e4aSRoland Stigge* NXP LPC32xx SoC Ethernet Controller 24de02e4aSRoland Stigge 34de02e4aSRoland StiggeRequired properties: 44de02e4aSRoland Stigge- compatible: Should be "nxp,lpc-eth" 54de02e4aSRoland Stigge- reg: Address and length of the register set for the device 64de02e4aSRoland Stigge- interrupts: Should contain ethernet controller interrupt 74de02e4aSRoland Stigge 84de02e4aSRoland StiggeOptional properties: 9e8f08ee0SSergei Shtylyov- phy-mode: See ethernet.txt file in the same directory. If the property is 10e8f08ee0SSergei Shtylyov absent, "rmii" is assumed. 114de02e4aSRoland Stigge- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering 124de02e4aSRoland Stigge 132c69dae8SAlexandre BelloniOptional subnodes: 142c69dae8SAlexandre Belloni- mdio : specifies the mdio bus, used as a container for phy nodes according to 152c69dae8SAlexandre Belloni phy.txt in the same directory 162c69dae8SAlexandre Belloni 172c69dae8SAlexandre Belloni 184de02e4aSRoland StiggeExample: 194de02e4aSRoland Stigge 204de02e4aSRoland Stigge mac: ethernet@31060000 { 214de02e4aSRoland Stigge compatible = "nxp,lpc-eth"; 224de02e4aSRoland Stigge reg = <0x31060000 0x1000>; 234de02e4aSRoland Stigge interrupt-parent = <&mic>; 244de02e4aSRoland Stigge interrupts = <29 0>; 254de02e4aSRoland Stigge 264de02e4aSRoland Stigge phy-mode = "rmii"; 274de02e4aSRoland Stigge use-iram; 284de02e4aSRoland Stigge }; 29