1*CC2520 IEEE 802.15.4 Compatible Radio*
2
3Required properties:
4	- compatible: 		should be "ti,cc2520"
5	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
6				sync or async operation mode
7	- reg:			the chipselect index
8	- pinctrl-0: 		pin control group to be used for this controller.
9	- pinctrl-names: 	must contain a "default" entry.
10	- fifo-gpio:		GPIO spec for the FIFO pin
11	- fifop-gpio:		GPIO spec for the FIFOP pin
12	- sfd-gpio:		GPIO spec for the SFD pin
13	- cca-gpio:		GPIO spec for the CCA pin
14	- vreg-gpio:		GPIO spec for the VREG pin
15	- reset-gpio:		GPIO spec for the RESET pin
16Optional properties:
17	- amplified:		include if the CC2520 is connected to a CC2591 amplifier
18
19Example:
20	cc2520@0 {
21		compatible = "ti,cc2520";
22		reg = <0>;
23		spi-max-frequency = <4000000>;
24		amplified;
25		pinctrl-names = "default";
26		pinctrl-0 = <&cc2520_cape_pins>;
27		fifo-gpio = <&gpio1 18 0>;
28		fifop-gpio = <&gpio1 19 0>;
29		sfd-gpio = <&gpio1 13 0>;
30		cca-gpio = <&gpio1 16 0>;
31		vreg-gpio = <&gpio0 31 0>;
32		reset-gpio = <&gpio1 12 0>;
33	};
34