1Hisilicon Fast Ethernet MAC controller
2
3Required properties:
4- compatible: should contain one of the following version strings:
5	* "hisilicon,hisi-femac-v1"
6	* "hisilicon,hisi-femac-v2"
7	and the soc string "hisilicon,hi3516cv300-femac".
8- reg: specifies base physical address(s) and size of the device registers.
9  The first region is the MAC core register base and size.
10  The second region is the global MAC control register.
11- interrupts: should contain the MAC interrupt.
12- clocks: A phandle to the MAC main clock.
13- resets: should contain the phandle to the MAC reset signal(required) and
14	the PHY reset signal(optional).
15- reset-names: should contain the reset signal name "mac"(required)
16	and "phy"(optional).
17- mac-address: see ethernet.txt [1].
18- phy-mode: see ethernet.txt [1].
19- phy-handle: see ethernet.txt [1].
20- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
21	The 1st cell is reset pre-delay in micro seconds.
22	The 2nd cell is reset pulse in micro seconds.
23	The 3rd cell is reset post-delay in micro seconds.
24
25[1] Documentation/devicetree/bindings/net/ethernet.txt
26
27Example:
28	hisi_femac: ethernet@10090000 {
29		compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2";
30		reg = <0x10090000 0x1000>,<0x10091300 0x200>;
31		interrupts = <12>;
32		clocks = <&crg HI3518EV200_ETH_CLK>;
33		resets = <&crg 0xec 0>,<&crg 0xec 3>;
34		reset-names = "mac","phy";
35		mac-address = [00 00 00 00 00 00];
36		phy-mode = "mii";
37		phy-handle = <&phy0>;
38		hisilicon,phy-reset-delays-us = <10000 20000 20000>;
39	};
40