1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Ethernet PHY Common Properties
8
9maintainers:
10  - Andrew Lunn <andrew@lunn.ch>
11  - Florian Fainelli <f.fainelli@gmail.com>
12  - Heiner Kallweit <hkallweit1@gmail.com>
13
14# The dt-schema tools will generate a select statement first by using
15# the compatible, and second by using the node name if any. In our
16# case, the node name is the one we want to match on, while the
17# compatible is optional.
18select:
19  properties:
20    $nodename:
21      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
22
23  required:
24    - $nodename
25
26properties:
27  $nodename:
28    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
29
30  compatible:
31    oneOf:
32      - const: ethernet-phy-ieee802.3-c22
33        description: PHYs that implement IEEE802.3 clause 22
34      - const: ethernet-phy-ieee802.3-c45
35        description: PHYs that implement IEEE802.3 clause 45
36      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
37        description:
38          If the PHY reports an incorrect ID (or none at all) then the
39          compatible list may contain an entry with the correct PHY ID
40          in the above form.
41          The first group of digits is the 16 bit Phy Identifier 1
42          register, this is the chip vendor OUI bits 3:18. The
43          second group of digits is the Phy Identifier 2 register,
44          this is the chip vendor OUI bits 19:24, followed by 10
45          bits of a vendor specific ID.
46      - items:
47          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48          - const: ethernet-phy-ieee802.3-c22
49      - items:
50          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51          - const: ethernet-phy-ieee802.3-c45
52
53  reg:
54    minimum: 0
55    maximum: 31
56    description:
57      The ID number for the PHY.
58
59  interrupts:
60    maxItems: 1
61
62  max-speed:
63    enum:
64      - 10
65      - 100
66      - 1000
67      - 2500
68      - 5000
69      - 10000
70      - 20000
71      - 25000
72      - 40000
73      - 50000
74      - 56000
75      - 100000
76      - 200000
77    description:
78      Maximum PHY supported speed in Mbits / seconds.
79
80  phy-10base-t1l-2.4vpp:
81    description: |
82      tristate, request/disable 2.4 Vpp operating mode. The values are:
83      0: Disable 2.4 Vpp operating mode.
84      1: Request 2.4 Vpp operating mode from link partner.
85      Absence of this property will leave configuration to default values.
86    $ref: /schemas/types.yaml#/definitions/uint32
87    enum: [0, 1]
88
89  broken-turn-around:
90    $ref: /schemas/types.yaml#/definitions/flag
91    description:
92      If set, indicates the PHY device does not correctly release
93      the turn around line low at end of the control phase of the
94      MDIO transaction.
95
96  clocks:
97    maxItems: 1
98    description:
99      External clock connected to the PHY. If not specified it is assumed
100      that the PHY uses a fixed crystal or an internal oscillator.
101
102  enet-phy-lane-swap:
103    $ref: /schemas/types.yaml#/definitions/flag
104    description:
105      If set, indicates the PHY will swap the TX/RX lanes to
106      compensate for the board being designed with the lanes
107      swapped.
108
109  enet-phy-lane-no-swap:
110    $ref: /schemas/types.yaml#/definitions/flag
111    description:
112      If set, indicates that PHY will disable swap of the
113      TX/RX lanes. This property allows the PHY to work correcly after
114      e.g. wrong bootstrap configuration caused by issues in PCB
115      layout design.
116
117  eee-broken-100tx:
118    $ref: /schemas/types.yaml#/definitions/flag
119    description:
120      Mark the corresponding energy efficient ethernet mode as
121      broken and request the ethernet to stop advertising it.
122
123  eee-broken-1000t:
124    $ref: /schemas/types.yaml#/definitions/flag
125    description:
126      Mark the corresponding energy efficient ethernet mode as
127      broken and request the ethernet to stop advertising it.
128
129  eee-broken-10gt:
130    $ref: /schemas/types.yaml#/definitions/flag
131    description:
132      Mark the corresponding energy efficient ethernet mode as
133      broken and request the ethernet to stop advertising it.
134
135  eee-broken-1000kx:
136    $ref: /schemas/types.yaml#/definitions/flag
137    description:
138      Mark the corresponding energy efficient ethernet mode as
139      broken and request the ethernet to stop advertising it.
140
141  eee-broken-10gkx4:
142    $ref: /schemas/types.yaml#/definitions/flag
143    description:
144      Mark the corresponding energy efficient ethernet mode as
145      broken and request the ethernet to stop advertising it.
146
147  eee-broken-10gkr:
148    $ref: /schemas/types.yaml#/definitions/flag
149    description:
150      Mark the corresponding energy efficient ethernet mode as
151      broken and request the ethernet to stop advertising it.
152
153  pses:
154    $ref: /schemas/types.yaml#/definitions/phandle-array
155    maxItems: 1
156    description:
157      Specifies a reference to a node representing a Power Sourcing Equipment.
158
159  phy-is-integrated:
160    $ref: /schemas/types.yaml#/definitions/flag
161    description:
162      If set, indicates that the PHY is integrated into the same
163      physical package as the Ethernet MAC. If needed, muxers
164      should be configured to ensure the integrated PHY is
165      used. The absence of this property indicates the muxers
166      should be configured so that the external PHY is used.
167
168  resets:
169    maxItems: 1
170
171  reset-names:
172    const: phy
173
174  reset-gpios:
175    maxItems: 1
176    description:
177      The GPIO phandle and specifier for the PHY reset signal.
178
179  reset-assert-us:
180    description:
181      Delay after the reset was asserted in microseconds. If this
182      property is missing the delay will be skipped.
183
184  reset-deassert-us:
185    description:
186      Delay after the reset was deasserted in microseconds. If
187      this property is missing the delay will be skipped.
188
189  sfp:
190    $ref: /schemas/types.yaml#/definitions/phandle
191    description:
192      Specifies a reference to a node representing a SFP cage.
193
194  rx-internal-delay-ps:
195    description: |
196      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
197      PHY's that have configurable RX internal delays.  If this property is
198      present then the PHY applies the RX delay.
199
200  tx-internal-delay-ps:
201    description: |
202      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
203      PHY's that have configurable TX internal delays. If this property is
204      present then the PHY applies the TX delay.
205
206  leds:
207    type: object
208
209    properties:
210      '#address-cells':
211        const: 1
212
213      '#size-cells':
214        const: 0
215
216    patternProperties:
217      '^led@[a-f0-9]+$':
218        $ref: /schemas/leds/common.yaml#
219
220        properties:
221          reg:
222            maxItems: 1
223            description:
224              This define the LED index in the PHY or the MAC. It's really
225              driver dependent and required for ports that define multiple
226              LED for the same port.
227
228        required:
229          - reg
230
231        unevaluatedProperties: false
232
233    additionalProperties: false
234
235required:
236  - reg
237
238additionalProperties: true
239
240examples:
241  - |
242    #include <dt-bindings/leds/common.h>
243
244    ethernet {
245        #address-cells = <1>;
246        #size-cells = <0>;
247
248        ethernet-phy@0 {
249            compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
250            interrupt-parent = <&PIC>;
251            interrupts = <35 1>;
252            reg = <0>;
253
254            resets = <&rst 8>;
255            reset-names = "phy";
256            reset-gpios = <&gpio1 4 1>;
257            reset-assert-us = <1000>;
258            reset-deassert-us = <2000>;
259
260            leds {
261                #address-cells = <1>;
262                #size-cells = <0>;
263
264                led@0 {
265                    reg = <0>;
266                    color = <LED_COLOR_ID_WHITE>;
267                    function = LED_FUNCTION_LAN;
268                    default-state = "keep";
269                };
270            };
271        };
272    };
273