1Marvell DSA Switch Device Tree Bindings 2--------------------------------------- 3 4WARNING: This binding is currently unstable. Do not program it into a 5FLASH never to be changed again. Once this binding is stable, this 6warning will be removed. 7 8If you need a stable binding, use the old dsa.txt binding. 9 10Marvell Switches are MDIO devices. The following properties should be 11placed as a child node of an mdio device. 12 13The properties described here are those specific to Marvell devices. 14Additional required and optional properties can be found in dsa.txt. 15 16Required properties: 17- compatible : Should be one of "marvell,mv88e6085", 18- reg : Address on the MII bus for the switch. 19 20Optional properties: 21 22- reset-gpios : Should be a gpio specifier for a reset line 23 24Example: 25 26 mdio { 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 switch0: switch@0 { 31 compatible = "marvell,mv88e6085"; 32 reg = <0>; 33 reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; 34 }; 35 }; 36