1Marvell DSA Switch Device Tree Bindings
2---------------------------------------
3
4WARNING: This binding is currently unstable. Do not program it into a
5FLASH never to be changed again. Once this binding is stable, this
6warning will be removed.
7
8If you need a stable binding, use the old dsa.txt binding.
9
10Marvell Switches are MDIO devices. The following properties should be
11placed as a child node of an mdio device.
12
13The properties described here are those specific to Marvell devices.
14Additional required and optional properties can be found in dsa.txt.
15
16Required properties:
17- compatible           : Should be one of "marvell,mv88e6085",
18- reg                  : Address on the MII bus for the switch.
19
20Optional properties:
21
22- reset-gpios		: Should be a gpio specifier for a reset line
23
24Example:
25
26       mdio {
27               #address-cells = <1>;
28               #size-cells = <0>;
29
30               switch0: switch@0 {
31                       compatible = "marvell,mv88e6085";
32                       reg = <0>;
33		       reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
34               };
35       };
36