1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Cortina Systems Gemini Ethernet Controller
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12description: |
13  This ethernet controller is found in the Gemini SoC family:
14  StorLink SL3512 and SL3516, also known as Cortina Systems
15  CS3512 and CS3516.
16
17properties:
18  compatible:
19    const: cortina,gemini-ethernet
20
21  reg:
22    minItems: 3
23    description: must contain the global registers and the V-bit and A-bit
24      memory areas, in total three register sets.
25
26  "#address-cells":
27    const: 1
28
29  "#size-cells":
30    const: 1
31
32  ranges: true
33
34#The subnodes represents the two ethernet ports in this device.
35#They are not independent of each other since they share resources
36#in the parent node, and are thus children.
37patternProperties:
38  "^ethernet-port@[0-9]+$":
39    type: object
40    unevaluatedProperties: false
41    description: contains the resources for ethernet port
42    allOf:
43      - $ref: ethernet-controller.yaml#
44    properties:
45      compatible:
46        const: cortina,gemini-ethernet-port
47
48      reg:
49        items:
50          - description: DMA/TOE memory
51          - description: GMAC memory area of the port
52
53      interrupts:
54        maxItems: 1
55        description: should contain the interrupt line of the port.
56                     this is nominally a level interrupt active high.
57
58      resets:
59        maxItems: 1
60        description: this must provide an SoC-integrated reset line for the port.
61
62      clocks:
63        maxItems: 1
64        description: this should contain a handle to the PCLK clock for
65                     clocking the silicon in this port
66
67      clock-names:
68        const: PCLK
69
70    required:
71      - reg
72      - compatible
73      - interrupts
74      - resets
75      - clocks
76      - clock-names
77
78required:
79  - compatible
80  - reg
81  - ranges
82
83additionalProperties: false
84
85examples:
86  - |
87    #include <dt-bindings/interrupt-controller/irq.h>
88    #include <dt-bindings/clock/cortina,gemini-clock.h>
89    #include <dt-bindings/reset/cortina,gemini-reset.h>
90    mdio0: mdio {
91      #address-cells = <1>;
92      #size-cells = <0>;
93      phy0: ethernet-phy@1 {
94        reg = <1>;
95        device_type = "ethernet-phy";
96      };
97      phy1: ethernet-phy@3 {
98        reg = <3>;
99        device_type = "ethernet-phy";
100      };
101    };
102
103
104    ethernet@60000000 {
105        compatible = "cortina,gemini-ethernet";
106        reg = <0x60000000 0x4000>, /* Global registers, queue */
107              <0x60004000 0x2000>, /* V-bit */
108              <0x60006000 0x2000>; /* A-bit */
109        #address-cells = <1>;
110        #size-cells = <1>;
111        ranges;
112
113        gmac0: ethernet-port@0 {
114                compatible = "cortina,gemini-ethernet-port";
115                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
116                      <0x6000a000 0x2000>; /* Port 0 GMAC */
117                interrupt-parent = <&intcon>;
118                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
119                resets = <&syscon GEMINI_RESET_GMAC0>;
120                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
121                clock-names = "PCLK";
122                phy-mode = "rgmii";
123                phy-handle = <&phy0>;
124        };
125
126        gmac1: ethernet-port@1 {
127                compatible = "cortina,gemini-ethernet-port";
128                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
129                      <0x6000e000 0x2000>; /* Port 1 GMAC */
130                interrupt-parent = <&intcon>;
131                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
132                resets = <&syscon GEMINI_RESET_GMAC1>;
133                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
134                clock-names = "PCLK";
135                phy-mode = "rgmii";
136                phy-handle = <&phy1>;
137        };
138    };
139