1Texas Instruments TCAN4x5x CAN Controller
2================================================
3
4This file provides device node information for the TCAN4x5x interface contains.
5
6Required properties:
7	- compatible: "ti,tcan4x5x"
8	- reg: 0
9	- #address-cells: 1
10	- #size-cells: 0
11	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
12			     operate at should be less than or equal to 18 MHz.
13	- data-ready-gpios: Interrupt GPIO for data and error reporting.
14	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
15
16See Documentation/devicetree/bindings/net/can/m_can.txt for additional
17required property details.
18
19Optional properties:
20	- reset-gpios: Hardwired output GPIO. If not defined then software
21		       reset.
22	- device-state-gpios: Input GPIO that indicates if the device is in
23			      a sleep state or if the device is active.
24
25Example:
26tcan4x5x: tcan4x5x@0 {
27		compatible = "ti,tcan4x5x";
28		reg = <0>;
29		#address-cells = <1>;
30		#size-cells = <1>;
31		spi-max-frequency = <10000000>;
32		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
33		data-ready-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
34		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
35		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
36		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
37};
38