1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Rockchip SoCs NAND FLASH Controller (NFC) 8 9allOf: 10 - $ref: nand-controller.yaml# 11 12maintainers: 13 - Heiko Stuebner <heiko@sntech.de> 14 15properties: 16 compatible: 17 oneOf: 18 - const: rockchip,px30-nfc 19 - const: rockchip,rk2928-nfc 20 - const: rockchip,rv1108-nfc 21 - items: 22 - enum: 23 - rockchip,rk3036-nfc 24 - rockchip,rk3128-nfc 25 - const: rockchip,rk2928-nfc 26 - items: 27 - const: rockchip,rk3308-nfc 28 - const: rockchip,rv1108-nfc 29 30 reg: 31 maxItems: 1 32 33 interrupts: 34 maxItems: 1 35 36 clocks: 37 minItems: 1 38 items: 39 - description: Bus Clock 40 - description: Module Clock 41 42 clock-names: 43 minItems: 1 44 items: 45 - const: ahb 46 - const: nfc 47 48 assigned-clocks: 49 maxItems: 1 50 51 assigned-clock-rates: 52 maxItems: 1 53 54 power-domains: 55 maxItems: 1 56 57patternProperties: 58 "^nand@[0-7]$": 59 type: object 60 properties: 61 reg: 62 minimum: 0 63 maximum: 7 64 65 nand-ecc-mode: 66 const: hw 67 68 nand-ecc-step-size: 69 const: 1024 70 71 nand-ecc-strength: 72 enum: [16, 24, 40, 60, 70] 73 description: | 74 The ECC configurations that can be supported are as follows. 75 NFC v600 ECC 16, 24, 40, 60 76 RK2928, RK3066, RK3188 77 78 NFC v622 ECC 16, 24, 40, 60 79 RK3036, RK3128 80 81 NFC v800 ECC 16 82 RK3308, RV1108 83 84 NFC v900 ECC 16, 40, 60, 70 85 RK3326, PX30 86 87 nand-bus-width: 88 const: 8 89 90 rockchip,boot-blks: 91 $ref: /schemas/types.yaml#/definitions/uint32 92 minimum: 2 93 default: 16 94 description: 95 The NFC driver need this information to select ECC 96 algorithms supported by the boot ROM. 97 Only used in combination with 'nand-is-boot-medium'. 98 99 rockchip,boot-ecc-strength: 100 enum: [16, 24, 40, 60, 70] 101 $ref: /schemas/types.yaml#/definitions/uint32 102 description: | 103 If specified it indicates that a different BCH/ECC setting is 104 supported by the boot ROM. 105 NFC v600 ECC 16, 24 106 RK2928, RK3066, RK3188 107 108 NFC v622 ECC 16, 24, 40, 60 109 RK3036, RK3128 110 111 NFC v800 ECC 16 112 RK3308, RV1108 113 114 NFC v900 ECC 16, 70 115 RK3326, PX30 116 117 Only used in combination with 'nand-is-boot-medium'. 118 119required: 120 - compatible 121 - reg 122 - interrupts 123 - clocks 124 - clock-names 125 126unevaluatedProperties: false 127 128examples: 129 - | 130 #include <dt-bindings/clock/rk3308-cru.h> 131 #include <dt-bindings/interrupt-controller/arm-gic.h> 132 nfc: nand-controller@ff4b0000 { 133 compatible = "rockchip,rk3308-nfc", 134 "rockchip,rv1108-nfc"; 135 reg = <0xff4b0000 0x4000>; 136 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 137 clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; 138 clock-names = "ahb", "nfc"; 139 assigned-clocks = <&clks SCLK_NANDC>; 140 assigned-clock-rates = <150000000>; 141 142 pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 143 &flash_rdn &flash_rdy &flash_wrn>; 144 pinctrl-names = "default"; 145 146 #address-cells = <1>; 147 #size-cells = <0>; 148 149 nand@0 { 150 reg = <0>; 151 label = "rk-nand"; 152 nand-bus-width = <8>; 153 nand-ecc-mode = "hw"; 154 nand-ecc-step-size = <1024>; 155 nand-ecc-strength = <16>; 156 nand-is-boot-medium; 157 rockchip,boot-blks = <8>; 158 rockchip,boot-ecc-strength = <16>; 159 }; 160 }; 161 162... 163