1* FSMC NAND 2 3Required properties: 4- compatible : "st,spear600-fsmc-nand" 5- reg : Address range of the mtd chip 6- reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd" 7 8Optional properties: 9- bank-width : Width (in bytes) of the device. If not present, the width 10 defaults to 1 byte 11- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped 12 13Example: 14 15 fsmc: flash@d1800000 { 16 compatible = "st,spear600-fsmc-nand"; 17 #address-cells = <1>; 18 #size-cells = <1>; 19 reg = <0xd1800000 0x1000 /* FSMC Register */ 20 0xd2000000 0x0010 /* NAND Base DATA */ 21 0xd2020000 0x0010 /* NAND Base ADDR */ 22 0xd2010000 0x0010>; /* NAND Base CMD */ 23 reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; 24 25 bank-width = <1>; 26 nand-skip-bbtscan; 27 28 partition@0 { 29 ... 30 }; 31 }; 32