1* FSMC NAND
2
3Required properties:
4- compatible : "st,spear600-fsmc-nand"
5- reg : Address range of the mtd chip
6- reg-names: Should contain the reg names "fsmc_regs" and "nand_data"
7- st,ale-off : Chip specific offset to ALE
8- st,cle-off : Chip specific offset to CLE
9
10Optional properties:
11- bank-width : Width (in bytes) of the device.  If not present, the width
12  defaults to 1 byte
13- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
14
15Example:
16
17	fsmc: flash@d1800000 {
18		compatible = "st,spear600-fsmc-nand";
19		#address-cells = <1>;
20		#size-cells = <1>;
21		reg = <0xd1800000 0x1000	/* FSMC Register */
22		       0xd2000000 0x4000>;	/* NAND Base */
23		reg-names = "fsmc_regs", "nand_data";
24		st,ale-off = <0x20000>;
25		st,cle-off = <0x10000>;
26
27		bank-width = <1>;
28		nand-skip-bbtscan;
29
30		partition@0 {
31			...
32		};
33	};
34