1* TI OMAP SDHCI Controller
2
3Refer to mmc.txt for standard MMC bindings.
4
5For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
6
7Required properties:
8- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
9	      Should be "ti,k2g-sdhci" for K2G
10- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
11	     (Not required for K2G).
12- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
13		 "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104",
14		 "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
15		 "hs200_1_8v",
16- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
17
18Example:
19	mmc1: mmc@4809c000 {
20		compatible = "ti,dra7-sdhci";
21		reg = <0x4809c000 0x400>;
22		ti,hwmods = "mmc1";
23		bus-width = <4>;
24		vmmc-supply = <&vmmc>; /* phandle to regulator node */
25	};
26