1* TI OMAP SDHCI Controller
2
3Refer to mmc.txt for standard MMC bindings.
4
5For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
6
7Required properties:
8- compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers
9	      Should be "ti,omap3-sdhci" for omap3 controllers
10	      Should be "ti,omap4-sdhci" for omap4 and ti81 controllers
11	      Should be "ti,omap5-sdhci" for omap5 controllers
12	      Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
13	      Should be "ti,k2g-sdhci" for K2G
14	      Should be "ti,am335-sdhci" for am335x controllers
15	      Should be "ti,am437-sdhci" for am437x controllers
16- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
17	     (Not required for K2G).
18- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
19		 "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104",
20		 "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
21		 "hs200_1_8v",
22- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
23
24Optional properties:
25- dmas:		List of DMA specifiers with the controller specific format as described
26		in the generic DMA client binding. A tx and rx specifier is required.
27- dma-names:	List of DMA request names. These strings correspond 1:1 with the
28		DMA specifiers listed in dmas. The string naming is to be "tx"
29		and "rx" for TX and RX DMA requests, respectively.
30
31Deprecated properties:
32- ti,non-removable: Compatible with the generic non-removable property
33
34Example:
35	mmc1: mmc@4809c000 {
36		compatible = "ti,dra7-sdhci";
37		reg = <0x4809c000 0x400>;
38		ti,hwmods = "mmc1";
39		bus-width = <4>;
40		vmmc-supply = <&vmmc>; /* phandle to regulator node */
41		dmas = <&sdma 61 &sdma 62>;
42		dma-names = "tx", "rx";
43	};
44