14177bc50STakao Orito* SOCIONEXT Milbeaut SDHCI controller 24177bc50STakao Orito 34177bc50STakao OritoThis file documents differences between the core properties in mmc.txt 44177bc50STakao Oritoand the properties used by the sdhci_milbeaut driver. 54177bc50STakao Orito 64177bc50STakao OritoRequired properties: 74177bc50STakao Orito- compatible: "socionext,milbeaut-m10v-sdhci-3.0" 84177bc50STakao Orito- clocks: Must contain an entry for each entry in clock-names. It is a 94177bc50STakao Orito list of phandles and clock-specifier pairs. 104177bc50STakao Orito See ../clocks/clock-bindings.txt for details. 114177bc50STakao Orito- clock-names: Should contain the following two entries: 124177bc50STakao Orito "iface" - clock used for sdhci interface 134177bc50STakao Orito "core" - core clock for sdhci controller 144177bc50STakao Orito 154177bc50STakao OritoOptional properties: 164177bc50STakao Orito- fujitsu,cmd-dat-delay-select: boolean property indicating that this host 174177bc50STakao Orito requires the CMD_DAT_DELAY control to be enabled. 184177bc50STakao Orito 194177bc50STakao OritoExample: 204177bc50STakao Orito sdhci3: mmc@1b010000 { 214177bc50STakao Orito compatible = "socionext,milbeaut-m10v-sdhci-3.0"; 224177bc50STakao Orito reg = <0x1b010000 0x10000>; 234177bc50STakao Orito interrupts = <0 265 0x4>; 244177bc50STakao Orito voltage-ranges = <3300 3300>; 254177bc50STakao Orito bus-width = <4>; 264177bc50STakao Orito clocks = <&clk 7>, <&ahb_clk>; 274177bc50STakao Orito clock-names = "core", "iface"; 284177bc50STakao Orito cap-sdio-irq; 294177bc50STakao Orito fujitsu,cmd-dat-delay-select; 304177bc50STakao Orito }; 31