1* Freescale Enhanced Secure Digital Host Controller (eSDHC)
2
3The Enhanced Secure Digital Host Controller provides an interface
4for MMC, SD, and SDIO types of memory cards.
5
6This file documents differences between the core properties described
7by mmc.txt and the properties used by the sdhci-esdhc driver.
8
9Required properties:
10  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
11    Possible compatibles for PowerPC:
12	"fsl,mpc8536-esdhc"
13	"fsl,mpc8378-esdhc"
14	"fsl,p2020-esdhc"
15	"fsl,p4080-esdhc"
16	"fsl,t1040-esdhc"
17	"fsl,t4240-esdhc"
18    Possible compatibles for ARM:
19	"fsl,ls1012a-esdhc"
20	"fsl,ls1088a-esdhc"
21	"fsl,ls1043a-esdhc"
22	"fsl,ls1046a-esdhc"
23	"fsl,ls2080a-esdhc"
24  - clock-frequency : specifies eSDHC base clock frequency.
25
26Optional properties:
27  - sdhci,wp-inverted : specifies that eSDHC controller reports
28    inverted write-protect state; New devices should use the generic
29    "wp-inverted" property.
30  - sdhci,1-bit-only : specifies that a controller can only handle
31    1-bit data transfers. New devices should use the generic
32    "bus-width = <1>" property.
33  - sdhci,auto-cmd12: specifies that a controller can only handle auto
34    CMD12.
35  - voltage-ranges : two cells are required, first cell specifies minimum
36    slot voltage (mV), second cell specifies maximum slot voltage (mV).
37    Several ranges could be specified.
38  - little-endian : If the host controller is little-endian mode, specify
39    this property. The default endian mode is big-endian.
40
41Example:
42
43sdhci@2e000 {
44	compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
45	reg = <0x2e000 0x1000>;
46	interrupts = <42 0x8>;
47	interrupt-parent = <&ipic>;
48	/* Filled in by U-Boot */
49	clock-frequency = <0>;
50	voltage-ranges = <3300 3300>;
51};
52