1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) 8 9maintainers: 10 - Masahiro Yamada <yamada.masahiro@socionext.com> 11 12properties: 13 compatible: 14 items: 15 - enum: 16 - amd,pensando-elba-sd4hc 17 - microchip,mpfs-sd4hc 18 - socionext,uniphier-sd4hc 19 - const: cdns,sd4hc 20 21 reg: 22 minItems: 1 23 maxItems: 2 24 25 interrupts: 26 maxItems: 1 27 28 clocks: 29 maxItems: 1 30 31 resets: 32 maxItems: 1 33 34 # PHY DLL input delays: 35 # They are used to delay the data valid window, and align the window to 36 # sampling clock. The delay starts from 5ns (for delay parameter equal to 0) 37 # and it is increased by 2.5ns in each step. 38 39 cdns,phy-input-delay-sd-highspeed: 40 description: Value of the delay in the input path for SD high-speed timing 41 $ref: /schemas/types.yaml#/definitions/uint32 42 minimum: 0 43 maximum: 0x1f 44 45 cdns,phy-input-delay-legacy: 46 description: Value of the delay in the input path for legacy timing 47 $ref: /schemas/types.yaml#/definitions/uint32 48 minimum: 0 49 maximum: 0x1f 50 51 cdns,phy-input-delay-sd-uhs-sdr12: 52 description: Value of the delay in the input path for SD UHS SDR12 timing 53 $ref: /schemas/types.yaml#/definitions/uint32 54 minimum: 0 55 maximum: 0x1f 56 57 cdns,phy-input-delay-sd-uhs-sdr25: 58 description: Value of the delay in the input path for SD UHS SDR25 timing 59 $ref: /schemas/types.yaml#/definitions/uint32 60 minimum: 0 61 maximum: 0x1f 62 63 cdns,phy-input-delay-sd-uhs-sdr50: 64 description: Value of the delay in the input path for SD UHS SDR50 timing 65 $ref: /schemas/types.yaml#/definitions/uint32 66 minimum: 0 67 maximum: 0x1f 68 69 cdns,phy-input-delay-sd-uhs-ddr50: 70 description: Value of the delay in the input path for SD UHS DDR50 timing 71 $ref: /schemas/types.yaml#/definitions/uint32 72 minimum: 0 73 maximum: 0x1f 74 75 cdns,phy-input-delay-mmc-highspeed: 76 description: Value of the delay in the input path for MMC high-speed timing 77 $ref: /schemas/types.yaml#/definitions/uint32 78 minimum: 0 79 maximum: 0x1f 80 81 cdns,phy-input-delay-mmc-ddr: 82 description: Value of the delay in the input path for eMMC high-speed DDR timing 83 84 # PHY DLL clock delays: 85 # Each delay property represents the fraction of the clock period. 86 # The approximate delay value will be 87 # (<delay property value>/128)*sdmclk_clock_period. 88 $ref: /schemas/types.yaml#/definitions/uint32 89 minimum: 0 90 maximum: 0x1f 91 92 cdns,phy-dll-delay-sdclk: 93 description: | 94 Value of the delay introduced on the sdclk output for all modes except 95 HS200, HS400 and HS400_ES. 96 $ref: /schemas/types.yaml#/definitions/uint32 97 minimum: 0 98 maximum: 0x7f 99 100 cdns,phy-dll-delay-sdclk-hsmmc: 101 description: | 102 Value of the delay introduced on the sdclk output for HS200, HS400 and 103 HS400_ES speed modes. 104 $ref: /schemas/types.yaml#/definitions/uint32 105 minimum: 0 106 maximum: 0x7f 107 108 cdns,phy-dll-delay-strobe: 109 description: | 110 Value of the delay introduced on the dat_strobe input used in 111 HS400 / HS400_ES speed modes. 112 $ref: /schemas/types.yaml#/definitions/uint32 113 minimum: 0 114 maximum: 0x7f 115 116required: 117 - compatible 118 - reg 119 - interrupts 120 - clocks 121 122allOf: 123 - $ref: mmc-controller.yaml 124 - if: 125 properties: 126 compatible: 127 contains: 128 const: amd,pensando-elba-sd4hc 129 then: 130 properties: 131 reg: 132 items: 133 - description: Host controller registers 134 - description: Elba byte-lane enable register for writes 135 required: 136 - resets 137 else: 138 properties: 139 reg: 140 maxItems: 1 141 142unevaluatedProperties: false 143 144examples: 145 - | 146 emmc: mmc@5a000000 { 147 compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; 148 reg = <0x5a000000 0x400>; 149 interrupts = <0 78 4>; 150 clocks = <&clk 4>; 151 bus-width = <8>; 152 mmc-ddr-1_8v; 153 mmc-hs200-1_8v; 154 mmc-hs400-1_8v; 155 cdns,phy-dll-delay-sdclk = <0>; 156 }; 157