1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics STM32 Timers bindings
8
9description: |
10  This hardware block provides 3 types of timer along with PWM functionality:
11    - advanced-control timers consist of a 16-bit auto-reload counter driven
12      by a programmable prescaler, break input feature, PWM outputs and
13      complementary PWM outputs channels.
14    - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter
15      driven by a programmable prescaler and PWM outputs.
16    - basic timers consist of a 16-bit auto-reload counter driven by a
17      programmable prescaler.
18
19maintainers:
20  - Benjamin Gaignard <benjamin.gaignard@st.com>
21  - Fabrice Gasnier <fabrice.gasnier@st.com>
22
23properties:
24  compatible:
25    const: st,stm32-timers
26
27  reg:
28    maxItems: 1
29
30  clocks:
31    maxItems: 1
32
33  clock-names:
34    items:
35      - const: int
36
37  reset:
38    maxItems: 1
39
40  dmas:
41    minItems: 1
42    maxItems: 7
43
44  dma-names:
45    items:
46      enum: [ ch1, ch2, ch3, ch4, up, trig, com ]
47    minItems: 1
48    maxItems: 7
49
50  "#address-cells":
51    const: 1
52
53  "#size-cells":
54    const: 0
55
56  pwm:
57    type: object
58
59    properties:
60      compatible:
61        const: st,stm32-pwm
62
63      "#pwm-cells":
64        const: 3
65
66      st,breakinput:
67        description:
68          One or two <index level filter> to describe break input
69          configurations.
70        $ref: /schemas/types.yaml#/definitions/uint32-matrix
71        items:
72          items:
73            - description: |
74                "index" indicates on which break input (0 or 1) the
75                configuration should be applied.
76              enum: [0, 1]
77            - description: |
78                "level" gives the active level (0=low or 1=high) of the
79                input signal for this configuration
80              enum: [0, 1]
81            - description: |
82                "filter" gives the filtering value (up to 15) to be applied.
83              maximum: 15
84        minItems: 1
85        maxItems: 2
86
87    required:
88      - "#pwm-cells"
89      - compatible
90
91patternProperties:
92  "^timer@[0-9]+$":
93    type: object
94
95    properties:
96      compatible:
97        enum:
98          - st,stm32-timer-trigger
99          - st,stm32h7-timer-trigger
100
101      reg:
102        description: Identify trigger hardware block.
103        items:
104          minimum: 0
105          maximum: 16
106
107    required:
108      - compatible
109      - reg
110
111  counter:
112    type: object
113
114    properties:
115      compatible:
116        const: st,stm32-timer-counter
117
118    required:
119      - compatible
120
121required:
122  - "#address-cells"
123  - "#size-cells"
124  - compatible
125  - reg
126  - clocks
127  - clock-names
128
129additionalProperties: false
130
131examples:
132  - |
133    #include <dt-bindings/clock/stm32mp1-clks.h>
134    timers2: timers@40000000 {
135      #address-cells = <1>;
136      #size-cells = <0>;
137      compatible = "st,stm32-timers";
138      reg = <0x40000000 0x400>;
139      clocks = <&rcc TIM2_K>;
140      clock-names = "int";
141      dmas = <&dmamux1 18 0x400 0x1>,
142             <&dmamux1 19 0x400 0x1>,
143             <&dmamux1 20 0x400 0x1>,
144             <&dmamux1 21 0x400 0x1>,
145             <&dmamux1 22 0x400 0x1>;
146      dma-names = "ch1", "ch2", "ch3", "ch4", "up";
147      pwm {
148        compatible = "st,stm32-pwm";
149        #pwm-cells = <3>;
150        st,breakinput = <0 1 5>;
151      };
152      timer@0 {
153        compatible = "st,stm32-timer-trigger";
154        reg = <0>;
155      };
156      counter {
157        compatible = "st,stm32-timer-counter";
158      };
159    };
160
161...
162