1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ROHM BD71828 Power Management Integrated Circuit bindings 8 9maintainers: 10 - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> 11 12description: | 13 BD71828GW is a single-chip power management IC for battery-powered portable 14 devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA 15 single-cell linear charger. Also included is a Coulomb counter, a real-time 16 clock (RTC), and a 32.768 kHz clock gate. 17 18properties: 19 compatible: 20 const: rohm,bd71828 21 22 reg: 23 description: 24 I2C slave address. 25 maxItems: 1 26 27 interrupts: 28 maxItems: 1 29 30 gpio-controller: true 31 32 "#gpio-cells": 33 const: 2 34 description: | 35 The first cell is the pin number and the second cell is used to specify 36 flags. See ../gpio/gpio.txt for more information. 37 38 clocks: 39 maxItems: 1 40 41 "#clock-cells": 42 const: 0 43 44 rohm,charger-sense-resistor-ohms: 45 minimum: 10000000 46 maximum: 50000000 47 description: | 48 BD71827 and BD71828 have SAR ADC for measuring charging currents. 49 External sense resistor (RSENSE in data sheet) should be used. If some 50 other but 30MOhm resistor is used the resistance value should be given 51 here in Ohms. 52 53 regulators: 54 $ref: ../regulator/rohm,bd71828-regulator.yaml 55 description: 56 List of child nodes that specify the regulators. 57 58 leds: 59 $ref: ../leds/rohm,bd71828-leds.yaml 60 61 gpio-reserved-ranges: 62 description: | 63 Usage of BD71828 GPIO pins can be changed via OTP. This property can be 64 used to mark the pins which should not be configured for GPIO. Please see 65 the ../gpio/gpio.txt for more information. 66 67required: 68 - compatible 69 - reg 70 - interrupts 71 - clocks 72 - "#clock-cells" 73 - regulators 74 - gpio-controller 75 - "#gpio-cells" 76 77examples: 78 - | 79 #include <dt-bindings/interrupt-controller/irq.h> 80 #include <dt-bindings/leds/common.h> 81 i2c { 82 #address-cells = <1>; 83 #size-cells = <0>; 84 pmic: pmic@4b { 85 compatible = "rohm,bd71828"; 86 reg = <0x4b>; 87 88 interrupt-parent = <&gpio1>; 89 interrupts = <29 IRQ_TYPE_LEVEL_LOW>; 90 91 clocks = <&osc 0>; 92 #clock-cells = <0>; 93 clock-output-names = "bd71828-32k-out"; 94 95 gpio-controller; 96 #gpio-cells = <2>; 97 gpio-reserved-ranges = <0 1>, <2 1>; 98 99 rohm,charger-sense-resistor-ohms = <10000000>; 100 101 regulators { 102 buck1: BUCK1 { 103 regulator-name = "buck1"; 104 regulator-min-microvolt = <500000>; 105 regulator-max-microvolt = <2000000>; 106 regulator-ramp-delay = <2500>; 107 }; 108 buck2: BUCK2 { 109 regulator-name = "buck2"; 110 regulator-min-microvolt = <500000>; 111 regulator-max-microvolt = <2000000>; 112 regulator-ramp-delay = <2500>; 113 }; 114 buck3: BUCK3 { 115 regulator-name = "buck3"; 116 regulator-min-microvolt = <1200000>; 117 regulator-max-microvolt = <2000000>; 118 }; 119 buck4: BUCK4 { 120 regulator-name = "buck4"; 121 regulator-min-microvolt = <1000000>; 122 regulator-max-microvolt = <1800000>; 123 }; 124 buck5: BUCK5 { 125 regulator-name = "buck5"; 126 regulator-min-microvolt = <2500000>; 127 regulator-max-microvolt = <3300000>; 128 }; 129 buck6: BUCK6 { 130 regulator-name = "buck6"; 131 regulator-min-microvolt = <500000>; 132 regulator-max-microvolt = <2000000>; 133 regulator-ramp-delay = <2500>; 134 }; 135 buck7: BUCK7 { 136 regulator-name = "buck7"; 137 regulator-min-microvolt = <500000>; 138 regulator-max-microvolt = <2000000>; 139 regulator-ramp-delay = <2500>; 140 }; 141 ldo1: LDO1 { 142 regulator-name = "ldo1"; 143 regulator-min-microvolt = <800000>; 144 regulator-max-microvolt = <3300000>; 145 }; 146 ldo2: LDO2 { 147 regulator-name = "ldo2"; 148 regulator-min-microvolt = <800000>; 149 regulator-max-microvolt = <3300000>; 150 }; 151 ldo3: LDO3 { 152 regulator-name = "ldo3"; 153 regulator-min-microvolt = <800000>; 154 regulator-max-microvolt = <3300000>; 155 }; 156 ldo4: LDO4 { 157 regulator-name = "ldo4"; 158 regulator-min-microvolt = <800000>; 159 regulator-max-microvolt = <3300000>; 160 }; 161 ldo5: LDO5 { 162 regulator-name = "ldo5"; 163 regulator-min-microvolt = <800000>; 164 regulator-max-microvolt = <3300000>; 165 }; 166 ldo6: LDO6 { 167 regulator-name = "ldo6"; 168 regulator-min-microvolt = <1800000>; 169 regulator-max-microvolt = <1800000>; 170 }; 171 ldo7_reg: LDO7 { 172 regulator-name = "ldo7"; 173 regulator-min-microvolt = <800000>; 174 regulator-max-microvolt = <3300000>; 175 }; 176 }; 177 178 leds { 179 compatible = "rohm,bd71828-leds"; 180 181 led-1 { 182 rohm,led-compatible = "bd71828-grnled"; 183 function = LED_FUNCTION_INDICATOR; 184 color = <LED_COLOR_ID_GREEN>; 185 }; 186 led-2 { 187 rohm,led-compatible = "bd71828-ambled"; 188 function = LED_FUNCTION_CHARGING; 189 color = <LED_COLOR_ID_AMBER>; 190 }; 191 }; 192 }; 193 }; 194