1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SPMI PMICs multi-function device
8
9description: |
10  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
11  to the chip via the SPMI (System Power Management Interface) bus.
12  Support for multiple independent functions are implemented by splitting the
13  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
14  each. A function can consume one or more of these fixed-size register regions.
15
16  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
17  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
18  QPNP is effectively a partitioning scheme for dividing the SPMI extended
19  register space up into logical pieces, and set of fixed register
20  locations/definitions within these regions, with some of these regions
21  specifically used for interrupt handling.
22
23maintainers:
24  - Stephen Boyd <sboyd@kernel.org>
25
26properties:
27  $nodename:
28    oneOf:
29      - pattern: '^pmic@.*$'
30      - pattern: '^pm(a|s)?[0-9]*@.*$'
31        deprecated: true
32
33  compatible:
34    items:
35      - enum:
36          - qcom,pm6150
37          - qcom,pm6150l
38          - qcom,pm6350
39          - qcom,pm660
40          - qcom,pm660l
41          - qcom,pm7250b
42          - qcom,pm7325
43          - qcom,pm8004
44          - qcom,pm8005
45          - qcom,pm8009
46          - qcom,pm8019
47          - qcom,pm8028
48          - qcom,pm8110
49          - qcom,pm8150
50          - qcom,pm8150b
51          - qcom,pm8150c
52          - qcom,pm8150l
53          - qcom,pm8226
54          - qcom,pm8350
55          - qcom,pm8350b
56          - qcom,pm8350c
57          - qcom,pm8841
58          - qcom,pm8909
59          - qcom,pm8916
60          - qcom,pm8941
61          - qcom,pm8950
62          - qcom,pm8953
63          - qcom,pm8994
64          - qcom,pm8998
65          - qcom,pma8084
66          - qcom,pmd9635
67          - qcom,pmi8950
68          - qcom,pmi8962
69          - qcom,pmi8994
70          - qcom,pmi8998
71          - qcom,pmk8002
72          - qcom,pmk8350
73          - qcom,pmm8155au
74          - qcom,pmp8074
75          - qcom,pmr735a
76          - qcom,pmr735b
77          - qcom,pms405
78          - qcom,pmx55
79          - qcom,pmx65
80          - qcom,smb2351
81      - const: qcom,spmi-pmic
82
83  reg:
84    minItems: 1
85    maxItems: 2
86
87  '#address-cells':
88    const: 1
89
90  '#size-cells':
91    const: 0
92
93  labibb:
94    type: object
95    $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
96
97  regulators:
98    type: object
99    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
100
101patternProperties:
102  "^adc@[0-9a-f]+$":
103    type: object
104    $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
105
106  "^adc-tm@[0-9a-f]+$":
107    type: object
108    # ref depends on compatible, see allOf below
109
110  "^audio-codec@[0-9a-f]+$":
111    type: object
112    additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
113
114  "extcon@[0-9a-f]+$":
115    type: object
116    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
117
118  "gpio(s)?@[0-9a-f]+$":
119    type: object
120    $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
121
122  "pon@[0-9a-f]+$":
123    type: object
124    $ref: /schemas/power/reset/qcom,pon.yaml#
125
126  "pwm@[0-9a-f]+$":
127    type: object
128    $ref: /schemas/leds/leds-qcom-lpg.yaml#
129
130  "^rtc@[0-9a-f]+$":
131    type: object
132    $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
133
134  "^temp-alarm@[0-9a-f]+$":
135    type: object
136    $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
137
138  "^vibrator@[0-9a-f]+$":
139    type: object
140    additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet
141
142  "^mpps@[0-9a-f]+$":
143    type: object
144    $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
145
146  "(.*)?(wled|leds)@[0-9a-f]+$":
147    type: object
148    $ref: /schemas/leds/backlight/qcom-wled.yaml#
149    unevaluatedProperties: false
150
151required:
152  - compatible
153  - reg
154
155allOf:
156  - if:
157      properties:
158        compatible:
159          contains:
160            enum:
161              - qcom,pm8998
162    then:
163      patternProperties:
164        "^adc-tm@[0-9a-f]+$":
165          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
166    else:
167      patternProperties:
168        "^adc-tm@[0-9a-f]+$":
169          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
170
171additionalProperties: false
172
173examples:
174  - |
175    #include <dt-bindings/spmi/spmi.h>
176    #include <dt-bindings/interrupt-controller/irq.h>
177    #include <dt-bindings/interrupt-controller/arm-gic.h>
178
179    spmi@c440000 {
180        compatible = "qcom,spmi-pmic-arb";
181        reg = <0x0c440000 0x1100>,
182              <0x0c600000 0x2000000>,
183              <0x0e600000 0x100000>,
184              <0x0e700000 0xa0000>,
185              <0x0c40a000 0x26000>;
186        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
187        interrupt-names = "periph_irq";
188        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
189        qcom,ee = <0>;
190        qcom,channel = <0>;
191        #address-cells = <2>;
192        #size-cells = <0>;
193        interrupt-controller;
194        #interrupt-cells = <4>;
195
196        pmi8998_lsid0: pmic@2 {
197            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
198            reg = <0x2 SPMI_USID>;
199            #address-cells = <1>;
200            #size-cells = <0>;
201
202            pmi8998_gpio: gpios@c000 {
203                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
204                reg = <0xc000>;
205                gpio-controller;
206                gpio-ranges = <&pmi8998_gpio 0 0 14>;
207                #gpio-cells = <2>;
208                interrupt-controller;
209                #interrupt-cells = <2>;
210            };
211        };
212    };
213
214  - |
215    #include <dt-bindings/input/input.h>
216    #include <dt-bindings/interrupt-controller/irq.h>
217    #include <dt-bindings/interrupt-controller/arm-gic.h>
218    #include <dt-bindings/iio/qcom,spmi-vadc.h>
219    #include <dt-bindings/spmi/spmi.h>
220
221    pmic@0 {
222        compatible = "qcom,pm6150", "qcom,spmi-pmic";
223        reg = <0x0 SPMI_USID>;
224        #address-cells = <1>;
225        #size-cells = <0>;
226
227        pon@800 {
228            compatible = "qcom,pm8998-pon";
229            reg = <0x800>;
230            mode-bootloader = <0x2>;
231            mode-recovery = <0x1>;
232
233            pwrkey {
234                compatible = "qcom,pm8941-pwrkey";
235                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
236                debounce = <15625>;
237                bias-pull-up;
238                linux,code = <KEY_POWER>;
239            };
240        };
241
242        temp-alarm@2400 {
243            compatible = "qcom,spmi-temp-alarm";
244            reg = <0x2400>;
245            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
246            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
247            io-channel-names = "thermal";
248            #thermal-sensor-cells = <0>;
249        };
250
251        pm6150_adc: adc@3100 {
252            compatible = "qcom,spmi-adc5";
253            reg = <0x3100>;
254            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
255            #address-cells = <1>;
256            #size-cells = <0>;
257            #io-channel-cells = <1>;
258
259            adc-chan@6 {
260                reg = <ADC5_DIE_TEMP>;
261                label = "die_temp";
262            };
263
264            adc-chan@4f {
265                reg = <ADC5_AMUX_THM3_100K_PU>;
266                qcom,ratiometric;
267                qcom,hw-settle-time = <200>;
268            };
269        };
270
271        adc-tm@3500 {
272            compatible = "qcom,spmi-adc-tm5";
273            reg = <0x3500>;
274            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
275            #thermal-sensor-cells = <1>;
276            #address-cells = <1>;
277            #size-cells = <0>;
278
279            charger-thermistor@0 {
280                reg = <0>;
281                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
282                qcom,ratiometric;
283                qcom,hw-settle-time-us = <200>;
284            };
285        };
286
287        pm6150_gpio: gpios@c000 {
288            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
289            reg = <0xc000>;
290            gpio-controller;
291            gpio-ranges = <&pm6150_gpio 0 0 10>;
292            #gpio-cells = <2>;
293            interrupt-controller;
294            #interrupt-cells = <2>;
295        };
296    };
297