1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/max77650.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: MAX77650 ultra low-power PMIC from Maxim Integrated. 8 9maintainers: 10 - Bartosz Golaszewski <bgolaszewski@baylibre.com> 11 12description: | 13 MAX77650 is an ultra-low power PMIC providing battery charging and power 14 supply for low-power IoT and wearable applications. 15 16 The GPIO-controller module is represented as part of the top-level PMIC 17 node. The device exposes a single GPIO line. 18 19 For device-tree bindings of other sub-modules (regulator, power supply, 20 LEDs and onkey) refer to the binding documents under the respective 21 sub-system directories. 22 23properties: 24 compatible: 25 const: maxim,max77650 26 27 reg: 28 description: 29 I2C device address. 30 maxItems: 1 31 32 interrupts: 33 maxItems: 1 34 35 interrupt-controller: true 36 37 "#interrupt-cells": 38 const: 2 39 description: 40 The first cell is the IRQ number, the second cell is the trigger type. 41 42 gpio-controller: true 43 44 "#gpio-cells": 45 const: 2 46 description: 47 The first cell is the pin number and the second cell is used to specify 48 the gpio active state. 49 50 gpio-line-names: 51 maxItems: 1 52 description: 53 Single string containing the name of the GPIO line. 54 55 regulators: 56 $ref: ../regulator/max77650-regulator.yaml 57 58 charger: 59 $ref: ../power/supply/max77650-charger.yaml 60 61 leds: 62 $ref: ../leds/leds-max77650.yaml 63 64 onkey: 65 $ref: ../input/max77650-onkey.yaml 66 67required: 68 - compatible 69 - reg 70 - interrupts 71 - interrupt-controller 72 - "#interrupt-cells" 73 - gpio-controller 74 - "#gpio-cells" 75 76examples: 77 - | 78 #include <dt-bindings/interrupt-controller/irq.h> 79 #include <dt-bindings/input/linux-event-codes.h> 80 i2c { 81 #address-cells = <1>; 82 #size-cells = <0>; 83 84 pmic@48 { 85 compatible = "maxim,max77650"; 86 reg = <0x48>; 87 88 interrupt-controller; 89 interrupt-parent = <&gpio2>; 90 #interrupt-cells = <2>; 91 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 92 93 gpio-controller; 94 #gpio-cells = <2>; 95 gpio-line-names = "max77650-charger"; 96 97 regulators { 98 compatible = "maxim,max77650-regulator"; 99 100 max77650_ldo: regulator-ldo { 101 regulator-compatible = "ldo"; 102 regulator-name = "max77650-ldo"; 103 regulator-min-microvolt = <1350000>; 104 regulator-max-microvolt = <2937500>; 105 }; 106 107 max77650_sbb0: regulator-sbb0 { 108 regulator-compatible = "sbb0"; 109 regulator-name = "max77650-sbb0"; 110 regulator-min-microvolt = <800000>; 111 regulator-max-microvolt = <1587500>; 112 }; 113 }; 114 115 charger { 116 compatible = "maxim,max77650-charger"; 117 input-voltage-min-microvolt = <4200000>; 118 input-current-limit-microamp = <285000>; 119 }; 120 121 leds { 122 compatible = "maxim,max77650-led"; 123 #address-cells = <1>; 124 #size-cells = <0>; 125 126 led@0 { 127 reg = <0>; 128 label = "blue:usr0"; 129 }; 130 131 led@1 { 132 reg = <1>; 133 label = "red:usr1"; 134 linux,default-trigger = "heartbeat"; 135 }; 136 137 led@2 { 138 reg = <2>; 139 label = "green:usr2"; 140 }; 141 }; 142 143 onkey { 144 compatible = "maxim,max77650-onkey"; 145 linux,code = <KEY_END>; 146 maxim,onkey-slide; 147 }; 148 }; 149 }; 150