1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Cirrus Logic Lochnagar Audio Development Board 8 9maintainers: 10 - patches@opensource.cirrus.com 11 12description: | 13 Lochnagar is an evaluation and development board for Cirrus Logic 14 Smart CODEC and Amp devices. It allows the connection of most Cirrus 15 Logic devices on mini-cards, as well as allowing connection of 16 various application processor systems to provide a full evaluation 17 platform. Audio system topology, clocking and power can all be 18 controlled through the Lochnagar, allowing the device under test 19 to be used in a variety of possible use cases. 20 21 Also see these documents for generic binding information: 22 [1] GPIO : ../gpio/gpio.txt 23 24 And these for relevant defines: 25 [2] include/dt-bindings/pinctrl/lochnagar.h 26 [3] include/dt-bindings/clock/lochnagar.h 27 28 And these documents for the required sub-node binding details: 29 [4] Clock: ../clock/cirrus,lochnagar.yaml 30 [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml 31 [6] Sound: ../sound/cirrus,lochnagar.yaml 32 [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml 33 34allOf: 35 - if: 36 properties: 37 compatible: 38 enum: 39 - cirrus,lochnagar2 40 then: 41 properties: 42 lochnagar-hwmon: 43 type: object 44 $ref: /schemas/hwmon/cirrus,lochnagar.yaml# 45 46 lochnagar-sc: 47 type: object 48 $ref: /schemas/sound/cirrus,lochnagar.yaml# 49 50properties: 51 compatible: 52 enum: 53 - cirrus,lochnagar1 54 - cirrus,lochnagar2 55 56 reg: 57 const: 0x22 58 59 reset-gpios: 60 maxItems: 1 61 62 present-gpios: 63 description: | 64 Host present line, indicating the presence of a 65 host system, see [1]. This can be omitted if the present line is 66 tied in hardware. 67 maxItems: 1 68 69 lochnagar-clk: 70 type: object 71 $ref: /schemas/clock/cirrus,lochnagar.yaml# 72 73 lochnagar-pmic32k: 74 type: object 75 $ref: /schemas/clock/fixed-clock.yaml# 76 properties: 77 clock-frequency: 78 const: 32768 79 80 lochnagar-clk12m: 81 type: object 82 $ref: /schemas/clock/fixed-clock.yaml# 83 properties: 84 clock-frequency: 85 const: 12288000 86 87 lochnagar-clk11m: 88 type: object 89 $ref: /schemas/clock/fixed-clock.yaml# 90 properties: 91 clock-frequency: 92 const: 11298600 93 94 lochnagar-clk24m: 95 type: object 96 $ref: /schemas/clock/fixed-clock.yaml# 97 properties: 98 clock-frequency: 99 const: 24576000 100 101 lochnagar-clk22m: 102 type: object 103 $ref: /schemas/clock/fixed-clock.yaml# 104 properties: 105 clock-frequency: 106 const: 22579200 107 108 lochnagar-clk8m: 109 type: object 110 $ref: /schemas/clock/fixed-clock.yaml# 111 properties: 112 clock-frequency: 113 const: 8192000 114 115 lochnagar-usb24m: 116 type: object 117 $ref: /schemas/clock/fixed-clock.yaml# 118 properties: 119 clock-frequency: 120 const: 24576000 121 122 lochnagar-usb12m: 123 type: object 124 $ref: /schemas/clock/fixed-clock.yaml# 125 properties: 126 clock-frequency: 127 const: 12288000 128 129 pinctrl: 130 type: object 131 $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# 132 133 lochnagar-hwmon: 134 type: object 135 $ref: /schemas/hwmon/cirrus,lochnagar.yaml# 136 137 lochnagar-sc: 138 type: object 139 $ref: /schemas/sound/cirrus,lochnagar.yaml# 140 141 VDDCORE: 142 description: 143 Initialisation data for the VDDCORE regulator, which supplies the 144 CODECs digital core if not being provided by an internal regulator. 145 type: object 146 $ref: /schemas/regulator/regulator.yaml# 147 properties: 148 compatible: 149 enum: 150 - cirrus,lochnagar2-vddcore 151 152 SYSVDD-supply: 153 description: 154 Primary power supply for the Lochnagar. 155 required: 156 - compatible 157 158 MICVDD: 159 description: 160 Initialisation data for the MICVDD regulator, which supplies the 161 CODECs MICVDD. 162 type: object 163 $ref: /schemas/regulator/regulator.yaml# 164 properties: 165 compatible: 166 enum: 167 - cirrus,lochnagar2-micvdd 168 169 SYSVDD-supply: 170 description: 171 Primary power supply for the Lochnagar. 172 required: 173 - compatible 174 175 MIC1VDD: 176 description: 177 Initialisation data for the MIC1VDD supplies. 178 type: object 179 $ref: /schemas/regulator/regulator.yaml# 180 properties: 181 compatible: 182 enum: 183 - cirrus,lochnagar2-mic1vdd 184 185 cirrus,micbias-input: 186 description: 187 A property selecting which of the CODEC minicard micbias outputs 188 should be used. 189 $ref: /schemas/types.yaml#/definitions/uint32 190 minimum: 1 191 maximum: 4 192 193 MICBIAS1-supply: 194 description: 195 Regulator supplies for the MIC1VDD outputs, supplying the digital 196 microphones, normally supplied from the attached CODEC. 197 required: 198 - compatible 199 200 MIC2VDD: 201 description: 202 Initialisation data for the MIC2VDD supplies. 203 type: object 204 $ref: /schemas/regulator/regulator.yaml# 205 properties: 206 compatible: 207 enum: 208 - cirrus,lochnagar2-mic2vdd 209 210 cirrus,micbias-input: 211 description: 212 A property selecting which of the CODEC minicard micbias outputs 213 should be used. 214 $ref: /schemas/types.yaml#/definitions/uint32 215 minimum: 1 216 maximum: 4 217 218 MICBIAS2-supply: 219 description: 220 Regulator supplies for the MIC2VDD outputs, supplying the digital 221 microphones, normally supplied from the attached CODEC. 222 required: 223 - compatible 224 225 VDD1V8: 226 description: 227 Recommended fixed regulator for the VDD1V8 regulator, which supplies 228 the CODECs analog and 1.8V digital supplies. 229 type: object 230 $ref: /schemas/regulator/regulator.yaml# 231 properties: 232 compatible: 233 enum: 234 - regulator-fixed 235 236 regulator-min-microvolt: 237 const: 1800000 238 239 regulator-max-microvolt: 240 const: 1800000 241 242 vin-supply: 243 description: 244 Should be set to same supply as SYSVDD 245 required: 246 - compatible 247 - regulator-min-microvolt 248 - regulator-max-microvolt 249 - regulator-boot-on 250 - regulator-always-on 251 - vin-supply 252 253required: 254 - compatible 255 - reg 256 - reset-gpios 257 - lochnagar-clk 258 - pinctrl 259 260additionalProperties: false 261 262examples: 263 - | 264 #include <dt-bindings/clk/lochnagar.h> 265 #include <dt-bindings/pinctrl/lochnagar.h> 266 i2c@e0004000 { 267 #address-cells = <1>; 268 #size-cells = <0>; 269 reg = <0xe0004000 0x1000>; 270 271 lochnagar: lochnagar@22 { 272 compatible = "cirrus,lochnagar2"; 273 reg = <0x22>; 274 275 reset-gpios = <&gpio0 55 0>; 276 present-gpios = <&gpio0 60 0>; 277 278 lochnagarclk: lochnagar-clk { 279 compatible = "cirrus,lochnagar2-clk"; 280 281 #clock-cells = <1>; 282 clocks = <&clkaudio>, <&clkpmic>; 283 clock-names = "ln-gf-mclk2", "ln-pmic-32k"; 284 285 assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>, 286 <&lochnagarclk LOCHNAGAR_CDC_MCLK2>; 287 assigned-clock-parents = <&clkaudio>, <&clkpmic>; 288 }; 289 290 clkpmic: lochnagar-pmic32k { 291 compatible = "fixed-clock"; 292 #clock-cells = <0>; 293 clock-frequency = <32768>; 294 }; 295 296 pinctrl { 297 compatible = "cirrus,lochnagar-pinctrl"; 298 299 gpio-controller; 300 #gpio-cells = <2>; 301 gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; 302 303 pinctrl-names = "default"; 304 pinctrl-0 = <&pinsettings>; 305 306 pinsettings: pin-settings { 307 ap2aif-pins { 308 input-enable; 309 groups = "gf-aif1"; 310 function = "codec-aif3"; 311 }; 312 codec2aif-pins { 313 output-enable; 314 groups = "codec-aif3"; 315 function = "gf-aif1"; 316 }; 317 }; 318 }; 319 320 lochnagar-sc { 321 compatible = "cirrus,lochnagar2-soundcard"; 322 323 #sound-dai-cells = <1>; 324 325 clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>; 326 clock-names = "mclk"; 327 }; 328 329 lochnagar-hwmon { 330 compatible = "cirrus,lochnagar2-hwmon"; 331 }; 332 333 MIC1VDD { 334 compatible = "cirrus,lochnagar2-mic1vdd"; 335 336 cirrus,micbias-input = <3>; 337 }; 338 339 MICVDD { 340 compatible = "cirrus,lochnagar2-micvdd"; 341 342 SYSVDD-supply = <&wallvdd>; 343 344 regulator-min-microvolt = <3300000>; 345 regulator-max-microvolt = <3300000>; 346 }; 347 348 VDD1V8 { 349 compatible = "regulator-fixed"; 350 351 regulator-name = "VDD1V8"; 352 regulator-min-microvolt = <1800000>; 353 regulator-max-microvolt = <1800000>; 354 regulator-boot-on; 355 regulator-always-on; 356 357 vin-supply = <&wallvdd>; 358 }; 359 }; 360 }; 361