1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
8
9maintainers:
10  - Hugues Fruchet <hugues.fruchet@st.com>
11
12properties:
13  compatible:
14    const: st,stm32-dcmi
15
16  reg:
17    maxItems: 1
18
19  interrupts:
20    maxItems: 1
21
22  clocks:
23    maxItems: 1
24
25  clock-names:
26    items:
27      - const: mclk
28
29  dmas:
30    maxItems: 1
31
32  dma-names:
33    items:
34      - const: tx
35
36  resets:
37    maxItems: 1
38
39  port:
40    $ref: /schemas/graph.yaml#/$defs/port-base
41    unevaluatedProperties: false
42    description:
43      DCMI supports a single port node with parallel bus.
44
45    properties:
46      endpoint:
47        $ref: video-interfaces.yaml#
48        unevaluatedProperties: false
49
50        properties:
51          bus-type:
52            enum: [5, 6]
53            default: 5
54
55          bus-width:
56            enum: [8, 10, 12, 14]
57            default: 8
58
59        allOf:
60          - if:
61              properties:
62                bus-type:
63                  const: 6
64
65            then:
66              properties:
67                hsync-active: false
68                vsync-active: false
69                bus-width:
70                  enum: [8]
71
72        required:
73          - bus-type
74          - pclk-sample
75
76required:
77  - compatible
78  - reg
79  - interrupts
80  - clocks
81  - clock-names
82  - resets
83  - dmas
84  - dma-names
85  - port
86
87additionalProperties: false
88
89examples:
90  - |
91    #include <dt-bindings/interrupt-controller/arm-gic.h>
92    #include <dt-bindings/clock/stm32mp1-clks.h>
93    #include <dt-bindings/reset/stm32mp1-resets.h>
94    dcmi: dcmi@4c006000 {
95        compatible = "st,stm32-dcmi";
96        reg = <0x4c006000 0x400>;
97        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
98        resets = <&rcc CAMITF_R>;
99        clocks = <&rcc DCMI>;
100        clock-names = "mclk";
101        dmas = <&dmamux1 75 0x400 0x0d>;
102        dma-names = "tx";
103
104        port {
105             dcmi_0: endpoint {
106                   remote-endpoint = <&ov5640_0>;
107                   bus-type = <5>;
108                   bus-width = <8>;
109                   hsync-active = <0>;
110                   vsync-active = <0>;
111                   pclk-sample = <1>;
112             };
113        };
114    };
115
116...
117