1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) 2021 Microchip Technology, Inc.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Microchip eXtended Image Sensor Controller (XISC)
9
10maintainers:
11  - Eugen Hristev <eugen.hristev@microchip.com>
12
13description: |
14  The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
15  Microchip AT91 SAM family of devices.
16
17  The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
18  The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
19  parallel sensor.
20
21  The XISC provides one clock output that is used to clock the demuxer/bridge.
22
23properties:
24  compatible:
25    const: microchip,sama7g5-isc
26
27  reg:
28    maxItems: 1
29
30  interrupts:
31    maxItems: 1
32
33  clocks:
34    maxItems: 1
35
36  clock-names:
37    items:
38      - const: hclock
39
40  '#clock-cells':
41    const: 0
42
43  clock-output-names:
44    const: isc-mck
45
46  microchip,mipi-mode:
47    type: boolean
48    description:
49      As the XISC is usually connected to a demux/bridge, the XISC receives
50      the same type of input, however, it should be aware of the type of
51      signals received. The mipi-mode enables different internal handling
52      of the data and clock lines.
53
54  port:
55    $ref: /schemas/graph.yaml#/$defs/port-base
56    description:
57      Input port node, single endpoint describing the input pad.
58
59    properties:
60      endpoint:
61        $ref: video-interfaces.yaml#
62
63        properties:
64          bus-type:
65            enum: [5, 6]
66
67          remote-endpoint: true
68
69          bus-width:
70            enum: [8, 9, 10, 11, 12]
71            default: 12
72
73          hsync-active:
74            enum: [0, 1]
75            default: 1
76
77          vsync-active:
78            enum: [0, 1]
79            default: 1
80
81          pclk-sample:
82            enum: [0, 1]
83            default: 1
84
85        required:
86          - remote-endpoint
87          - bus-type
88
89        additionalProperties: false
90
91    additionalProperties: false
92
93required:
94  - compatible
95  - reg
96  - clocks
97  - clock-names
98  - '#clock-cells'
99  - clock-output-names
100  - port
101
102additionalProperties: false
103
104examples:
105  - |
106    #include <dt-bindings/interrupt-controller/arm-gic.h>
107    #include <dt-bindings/clock/at91.h>
108    #include <dt-bindings/interrupt-controller/irq.h>
109
110    xisc: xisc@e1408000 {
111        compatible = "microchip,sama7g5-isc";
112        reg = <0xe1408000 0x2000>;
113        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
114        clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
115        clock-names = "hclock";
116        #clock-cells = <0>;
117        clock-output-names = "isc-mck";
118
119        port {
120                xisc_in: endpoint {
121                       bus-type = <5>; /* Parallel */
122                       remote-endpoint = <&csi2dc_out>;
123                       hsync-active = <1>;
124                       vsync-active = <1>;
125                       bus-width = <12>;
126                };
127        };
128    };
129
130