1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Sony IMX290 1/2.8-Inch CMOS Image Sensor 8 9maintainers: 10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com> 12 13description: |- 14 The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square 15 Pixel for Color Cameras. It is programmable through I2C and 4-wire 16 interfaces. The sensor output is available via CMOS logic parallel SDR 17 output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 18 bus is the default. No bindings have been defined for the other busses. 19 20properties: 21 compatible: 22 enum: 23 - sony,imx290 24 25 reg: 26 maxItems: 1 27 28 clocks: 29 maxItems: 1 30 31 clock-names: 32 description: Input clock (37.125 MHz or 74.25 MHz) 33 items: 34 - const: xclk 35 36 clock-frequency: 37 description: Frequency of the xclk clock in Hz 38 39 vdda-supply: 40 description: Analog power supply (2.9V) 41 42 vddd-supply: 43 description: Digital core power supply (1.2V) 44 45 vdddo-supply: 46 description: Digital I/O power supply (1.8V) 47 48 reset-gpios: 49 description: Sensor reset (XCLR) GPIO 50 maxItems: 1 51 52 port: 53 $ref: /schemas/graph.yaml#/$defs/port-base 54 description: | 55 Video output port 56 57 properties: 58 endpoint: 59 $ref: /schemas/media/video-interfaces.yaml# 60 unevaluatedProperties: false 61 62 properties: 63 data-lanes: 64 anyOf: 65 - items: 66 - const: 1 67 - const: 2 68 - items: 69 - const: 1 70 - const: 2 71 - const: 3 72 - const: 4 73 74 link-frequencies: true 75 76 required: 77 - data-lanes 78 - link-frequencies 79 80 additionalProperties: false 81 82required: 83 - compatible 84 - reg 85 - clocks 86 - clock-names 87 - clock-frequency 88 - vdda-supply 89 - vddd-supply 90 - vdddo-supply 91 - port 92 93additionalProperties: false 94 95examples: 96 - | 97 #include <dt-bindings/gpio/gpio.h> 98 99 i2c { 100 #address-cells = <1>; 101 #size-cells = <0>; 102 103 imx290: camera-sensor@1a { 104 compatible = "sony,imx290"; 105 reg = <0x1a>; 106 107 pinctrl-names = "default"; 108 pinctrl-0 = <&camera_rear_default>; 109 110 clocks = <&gcc 90>; 111 clock-names = "xclk"; 112 clock-frequency = <37125000>; 113 114 vdddo-supply = <&camera_vdddo_1v8>; 115 vdda-supply = <&camera_vdda_2v8>; 116 vddd-supply = <&camera_vddd_1v5>; 117 118 reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; 119 120 port { 121 imx290_ep: endpoint { 122 data-lanes = <1 2 3 4>; 123 link-frequencies = /bits/ 64 <445500000>; 124 remote-endpoint = <&csiphy0_ep>; 125 }; 126 }; 127 }; 128 }; 129... 130