1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2# Copyright (C) 2020 SiFive, Inc.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: SiFive Platform-Level Interrupt Controller (PLIC)
9
10description:
11  SiFive SoCs and other RISC-V SoCs include an implementation of the
12  Platform-Level Interrupt Controller (PLIC) high-level specification in
13  the RISC-V Privileged Architecture specification. The PLIC connects all
14  external interrupts in the system to all hart contexts in the system, via
15  the external interrupt source in each hart.
16
17  A hart context is a privilege mode in a hardware execution thread. For example,
18  in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
19  privilege modes per hart; machine mode and supervisor mode.
20
21  Each interrupt can be enabled on per-context basis. Any context can claim
22  a pending enabled interrupt and then release it once it has been handled.
23
24  Each interrupt has a configurable priority. Higher priority interrupts are
25  serviced first.  Each context can specify a priority threshold. Interrupts
26  with priority below this threshold will not cause the PLIC to raise its
27  interrupt line leading to the context.
28
29  The PLIC supports both edge-triggered and level-triggered interrupts. For
30  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
31  seen while an interrupt handler is active; the PLIC may either queue them or
32  ignore them. In the first case, handlers are oblivious to the trigger type, so
33  it is not included in the interrupt specifier. In the second case, software
34  needs to know the trigger type, so it can reorder the interrupt flow to avoid
35  missing interrupts. This special handling is needed by at least the Renesas
36  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
37
38  While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
39  "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
40  contains a specific memory layout, which is documented in chapter 8 of the
41  SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
42
43  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
44  T-HEAD PLIC implementation requires setting a delegation bit to allow access
45  from S-mode. So add thead,c900-plic to distinguish them.
46
47maintainers:
48  - Paul Walmsley  <paul.walmsley@sifive.com>
49  - Palmer Dabbelt <palmer@dabbelt.com>
50
51properties:
52  compatible:
53    oneOf:
54      - items:
55          - enum:
56              - renesas,r9a07g043-plic
57          - const: andestech,nceplic100
58      - items:
59          - enum:
60              - sifive,fu540-c000-plic
61              - starfive,jh7100-plic
62              - starfive,jh7110-plic
63              - canaan,k210-plic
64          - const: sifive,plic-1.0.0
65      - items:
66          - enum:
67              - allwinner,sun20i-d1-plic
68          - const: thead,c900-plic
69      - items:
70          - const: sifive,plic-1.0.0
71          - const: riscv,plic0
72        deprecated: true
73        description: For the QEMU virt machine only
74
75  reg:
76    maxItems: 1
77
78  '#address-cells':
79    const: 0
80
81  '#interrupt-cells': true
82
83  interrupt-controller: true
84
85  interrupts-extended:
86    minItems: 1
87    maxItems: 15872
88    description:
89      Specifies which contexts are connected to the PLIC, with "-1" specifying
90      that a context is not present. Each node pointed to should be a
91      riscv,cpu-intc node, which has a riscv node as parent.
92
93  riscv,ndev:
94    $ref: /schemas/types.yaml#/definitions/uint32
95    description:
96      Specifies how many external interrupts are supported by this controller.
97
98  clocks: true
99
100  power-domains: true
101
102  resets: true
103
104required:
105  - compatible
106  - '#address-cells'
107  - '#interrupt-cells'
108  - interrupt-controller
109  - reg
110  - interrupts-extended
111  - riscv,ndev
112
113allOf:
114  - if:
115      properties:
116        compatible:
117          contains:
118            enum:
119              - andestech,nceplic100
120              - thead,c900-plic
121
122    then:
123      properties:
124        '#interrupt-cells':
125          const: 2
126
127    else:
128      properties:
129        '#interrupt-cells':
130          const: 1
131
132  - if:
133      properties:
134        compatible:
135          contains:
136            const: renesas,r9a07g043-plic
137
138    then:
139      properties:
140        clocks:
141          maxItems: 1
142
143        power-domains:
144          maxItems: 1
145
146        resets:
147          maxItems: 1
148
149      required:
150        - clocks
151        - power-domains
152        - resets
153
154additionalProperties: false
155
156examples:
157  - |
158    plic: interrupt-controller@c000000 {
159      #address-cells = <0>;
160      #interrupt-cells = <1>;
161      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
162      interrupt-controller;
163      interrupts-extended = <&cpu0_intc 11>,
164                            <&cpu1_intc 11>, <&cpu1_intc 9>,
165                            <&cpu2_intc 11>, <&cpu2_intc 9>,
166                            <&cpu3_intc 11>, <&cpu3_intc 9>,
167                            <&cpu4_intc 11>, <&cpu4_intc 9>;
168      reg = <0xc000000 0x4000000>;
169      riscv,ndev = <10>;
170    };
171