1* MELFAS MIP4 Touchscreen
2
3Required properties:
4- compatible: must be "melfas,mip4_ts"
5- reg: I2C slave address of the chip (0x48 or 0x34)
6- interrupt-parent: interrupt controller to which the chip is connected
7- interrupts: interrupt to which the chip is connected
8
9Optional properties:
10- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
11
12Example:
13	i2c@00000000 {
14		touchscreen: melfas_mip4@48 {
15			compatible = "melfas,mip4_ts";
16			reg = <0x48>;
17			interrupt-parent = <&gpio>;
18			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
19			ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
20		};
21	};
22