1Freescale mx25 TS conversion queue module
2
3mx25 touchscreen conversion queue module which controls the ADC unit of the
4mx25 for attached touchscreens.
5
6Required properties:
7 - compatible: Should be "fsl,imx25-tcq".
8 - reg: Memory range of the device.
9 - interrupts: Should be the interrupt number associated with this module within
10   the tscadc unit (<0>).
11 - interrupt-parent: Should be a phandle to the tscadc unit.
12 - fsl,wires: Should be '<4>' or '<5>'
13
14Optional properties:
15 - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
16 - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
17   between 1 and 4096. It is the ratio between the internal reference voltage
18   and the measured voltage after the plate was precharged. Resistance between
19   plates and therefore the voltage decreases with pressure so that a smaller
20   value is equivalent to a higher pressure.
21 - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
22   the actual touch detection to wait for an even charge distribution in the
23   plate.
24
25This device includes two conversion queues which can be added as subnodes.
26The first queue is for the touchscreen, the second for general purpose ADC.
27
28Example:
29	tsc: tcq@50030400 {
30		compatible = "fsl,imx25-tcq";
31		reg = <0x50030400 0x60>;
32		interrupt-parent = <&tscadc>;
33		interrupts = <0>;
34		fsl,wires = <4>;
35	};
36