1* EETI eGalax Multiple Touch Controller
2
3Required properties:
4- compatible: must be "eeti,egalax_ts"
5- reg: i2c slave address
6- interrupts: touch controller interrupt
7- wakeup-gpios: the gpio pin to be used for waking up the controller
8  and also used as irq pin
9
10Example:
11
12	touchscreen@4 {
13		compatible = "eeti,egalax_ts";
14		reg = <0x04>;
15		interrupt-parent = <&gpio1>;
16		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
17		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
18	};
19