1* EETI eGalax Multiple Touch Controller
2
3Required properties:
4- compatible: must be "eeti,egalax_ts"
5- reg: i2c slave address
6- interrupt-parent: the phandle for the interrupt controller
7- interrupts: touch controller interrupt
8- wakeup-gpios: the gpio pin to be used for waking up the controller
9  and also used as irq pin
10
11Example:
12
13	egalax_ts@04 {
14		compatible = "eeti,egalax_ts";
15		reg = <0x04>;
16		interrupt-parent = <&gpio1>;
17		interrupts = <9 2>;
18		wakeup-gpios = <&gpio1 9 0>;
19	};
20