1* GPIO driven matrix keypad device tree bindings
2
3GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
4The matrix keypad supports multiple row and column lines, a key can be
5placed at each intersection of a unique row and a unique column. The matrix
6keypad can sense a key-press and key-release by means of GPIO lines and
7report the event using GPIO interrupts to the cpu.
8
9Required Properties:
10- compatible:		Should be "gpio-matrix-keypad"
11- row-gpios:		List of gpios used as row lines. The gpio specifier
12			for this property depends on the gpio controller to
13			which these row lines are connected.
14- col-gpios:		List of gpios used as column lines. The gpio specifier
15			for this property depends on the gpio controller to
16			which these column lines are connected.
17- linux,keymap:		The definition can be found at
18			bindings/input/matrix-keymap.txt
19
20Optional Properties:
21- linux,no-autorepeat:	do no enable autorepeat feature.
22- wakeup-source:	use any event on keypad as wakeup event.
23			(Legacy property supported: "linux,wakeup")
24- debounce-delay-ms:	debounce interval in milliseconds
25- col-scan-delay-us:	delay, measured in microseconds, that is needed
26			before we can scan keypad after activating column gpio
27
28Example:
29	matrix-keypad {
30		compatible = "gpio-matrix-keypad";
31		debounce-delay-ms = <5>;
32		col-scan-delay-us = <2>;
33
34		row-gpios = <&gpio2 25 0
35			     &gpio2 26 0
36			     &gpio2 27 0>;
37
38		col-gpios = <&gpio2 21 0
39			     &gpio2 22 0>;
40
41		linux,keymap = <0x0000008B
42				0x0100009E
43				0x02000069
44				0x0001006A
45				0x0101001C
46				0x0201006C>;
47	};
48