1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Semtech's SX9310 capacitive proximity sensor
8
9maintainers:
10  - Daniel Campello <campello@chromium.org>
11
12description: |
13  Semtech's SX9310/SX9311 capacitive proximity/button solution.
14
15  Specifications about the devices can be found at:
16  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
17
18allOf:
19  - $ref: /schemas/iio/iio.yaml#
20
21properties:
22  compatible:
23    enum:
24      - semtech,sx9310
25      - semtech,sx9311
26
27  reg:
28    maxItems: 1
29
30  interrupts:
31    description:
32      The sole interrupt generated by the device used to announce the
33      preceding reading request has finished and that data is
34      available or that a close/far proximity event has happened.
35    maxItems: 1
36
37  vdd-supply:
38    description: Main power supply
39
40  svdd-supply:
41    description: Host interface power supply
42
43  "#io-channel-cells":
44    const: 1
45
46  semtech,cs0-ground:
47    description: Indicates the CS0 sensor is connected to ground.
48    type: boolean
49
50  semtech,combined-sensors:
51    $ref: /schemas/types.yaml#/definitions/uint32-array
52    description: |
53      List of which sensors are combined and represented by CS3.
54      Possible values are -
55      3        - CS3 (internal)
56      0 1      - CS0 + CS1
57      1 2      - CS1 + CS2 (default)
58      0 1 2 3  - CS0 + CS1 + CS2 + CS3
59    items:
60      enum: [ 0, 1, 2, 3 ]
61    minItems: 1
62    maxItems: 4
63
64  semtech,resolution:
65    description:
66      Capacitance measure resolution. Refer to datasheet for more details.
67    enum:
68      - coarsest
69      - very-coarse
70      - coarse
71      - medium-coarse
72      - medium
73      - fine
74      - very-fine
75      - finest
76
77  semtech,startup-sensor:
78    $ref: /schemas/types.yaml#/definitions/uint32
79    enum: [0, 1, 2, 3]
80    default: 0
81    description:
82      Sensor used for start-up proximity detection. The combined
83      sensor is represented by the value 3. This is used for initial
84      compensation.
85
86  semtech,proxraw-strength:
87    $ref: /schemas/types.yaml#/definitions/uint32
88    enum: [0, 2, 4, 8]
89    default: 2
90    description:
91      PROXRAW filter strength. A value of 0 represents off, and other values
92      represent 1-1/N.
93
94  semtech,avg-pos-strength:
95    $ref: /schemas/types.yaml#/definitions/uint32
96    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
97    default: 16
98    description:
99      Average positive filter strength. A value of 0 represents off and
100      UINT_MAX (4294967295) represents infinite. Other values
101      represent 1-1/N.
102
103required:
104  - compatible
105  - reg
106  - "#io-channel-cells"
107
108unevaluatedProperties: false
109
110examples:
111  - |
112    #include <dt-bindings/interrupt-controller/irq.h>
113    i2c {
114      #address-cells = <1>;
115      #size-cells = <0>;
116      proximity@28 {
117        compatible = "semtech,sx9310";
118        reg = <0x28>;
119        interrupt-parent = <&pio>;
120        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
121        vdd-supply = <&pp3300_a>;
122        svdd-supply = <&pp1800_prox>;
123        #io-channel-cells = <1>;
124        semtech,cs0-ground;
125        semtech,combined-sensors = <1 2 3>;
126        semtech,resolution = "fine";
127        semtech,startup-sensor = <1>;
128        semtech,proxraw-strength = <2>;
129        semtech,avg-pos-strength = <64>;
130      };
131    };
132