1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Honeywell mprls0025pa pressure sensor
8
9maintainers:
10  - Andreas Klinger <ak@it-klinger.de>
11
12description: |
13  Honeywell pressure sensor of model mprls0025pa.
14
15  This sensor has an I2C and SPI interface. Only the I2C interface is
16  implemented.
17
18  There are many models with different pressure ranges available. The vendor
19  calls them "mpr series". All of them have the identical programming model and
20  differ in the pressure range, unit and transfer function.
21
22  To support different models one need to specify the pressure range as well as
23  the transfer function. Pressure range needs to be converted from its unit to
24  pascal.
25
26  The transfer function defines the ranges of numerical values delivered by the
27  sensor. The minimal range value stands for the minimum pressure and the
28  maximum value also for the maximum pressure with linear relation inside the
29  range.
30
31  Specifications about the devices can be found at:
32    https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
33      products/sensors/pressure-sensors/board-mount-pressure-sensors/
34      micropressure-mpr-series/documents/
35      sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
36
37properties:
38  compatible:
39    const: honeywell,mprls0025pa
40
41  reg:
42    maxItems: 1
43
44  interrupts:
45    maxItems: 1
46
47  reset-gpios:
48    description:
49      Optional GPIO for resetting the device.
50      If not present the device is not reset during the probe.
51    maxItems: 1
52
53  honeywell,pmin-pascal:
54    description:
55      Minimum pressure value the sensor can measure in pascal.
56    $ref: /schemas/types.yaml#/definitions/uint32
57
58  honeywell,pmax-pascal:
59    description:
60      Maximum pressure value the sensor can measure in pascal.
61    $ref: /schemas/types.yaml#/definitions/uint32
62
63  honeywell,transfer-function:
64    description: |
65      Transfer function which defines the range of valid values delivered by the
66      sensor.
67      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
68      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
69      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
70    $ref: /schemas/types.yaml#/definitions/uint32
71
72  vdd-supply:
73    description: provide VDD power to the sensor.
74
75required:
76  - compatible
77  - reg
78  - honeywell,pmin-pascal
79  - honeywell,pmax-pascal
80  - honeywell,transfer-function
81  - vdd-supply
82
83additionalProperties: false
84
85examples:
86  - |
87    #include <dt-bindings/gpio/gpio.h>
88    #include <dt-bindings/interrupt-controller/irq.h>
89    i2c {
90        #address-cells = <1>;
91        #size-cells = <0>;
92
93        pressure@18 {
94            compatible = "honeywell,mprls0025pa";
95            reg = <0x18>;
96            reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
97            interrupt-parent = <&gpio3>;
98            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
99            honeywell,pmin-pascal = <0>;
100            honeywell,pmax-pascal = <172369>;
101            honeywell,transfer-function = <1>;
102            vdd-supply = <&vcc_3v3>;
103        };
104    };
105