1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/adc/renesas,rcar-gyroadc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas R-Car GyroADC
8
9maintainers:
10  - Marek Vasut <marek.vasut+renesas@gmail.com>
11
12description: |
13  The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
14  which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
15  are sampled by the GyroADC block in a round-robin fashion and the result
16  presented in the GyroADC registers.
17  The ADC bindings should match with that of the devices connected to a
18  full featured SPI bus.
19
20properties:
21  compatible:
22    items:
23      - enum:
24          - renesas,r8a7791-gyroadc
25          - renesas,r8a7792-gyroadc
26      - const: renesas,rcar-gyroadc
27
28  reg:
29    maxItems: 1
30
31  clocks:
32    maxItems: 1
33
34  clock-names:
35    const: fck
36
37  power-domains:
38    maxItems: 1
39
40  resets:
41    maxItems: 1
42
43  "#address-cells":
44    const: 1
45
46  "#size-cells":
47    const: 0
48
49additionalProperties: false
50
51required:
52  - compatible
53  - reg
54  - clocks
55  - clock-names
56  - power-domains
57  - resets
58  - "#address-cells"
59  - "#size-cells"
60
61patternProperties:
62  "@[0-7]$":
63    type: object
64    properties:
65      compatible:
66        description: |
67          fujitsu,mb88101a
68          - Fujitsu MB88101A compatible mode,
69            12bit sampling, up to 4 channels can be sampled in round-robin
70            fashion. One Fujitsu chip supplies four GyroADC channels with
71            data as it contains four ADCs on the chip and thus for 4-channel
72            operation, single MB88101A is required. The Cx chipselect lines
73            of the MB88101A connect directly to two CHS lines of the GyroADC,
74            no demuxer is required. The data out line of each MB88101A
75            connects to a shared input pin of the GyroADC.
76          ti,adcs7476 or ti,adc121 or adi,ad7476
77          - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, 15bit
78            sampling, up to 8 channels can be sampled in round-robin
79            fashion. One TI/ADI chip supplies single ADC channel with data,
80            thus for 8-channel operation, 8 chips are required.
81            A 3:8 chipselect demuxer is  required to connect the nCS line
82            of the TI/ADI chips to the GyroADC, while MISO line of each
83            TI/ADI ADC connects to a shared input pin of the GyroADC.
84          maxim,max1162 or maxim,max11100
85          - Maxim MAX1162 / Maxim MAX11100 compatible mode,  16bit sampling,
86            up to 8 channels can be sampled in round-robin fashion. One
87            Maxim chip supplies single ADC channel with data, thus for
88            8-channel operation, 8 chips are required.
89            A 3:8 chipselect demuxer is required to connect the nCS line
90            of the MAX chips to the GyroADC, while MISO line of each Maxim
91            ADC connects to a shared input pin of the GyroADC.
92        enum:
93          - adi,7476
94          - fujitsu,mb88101a
95          - maxim,max1162
96          - maxim,max11100
97          - ti,adcs7476
98          - ti,adc121
99
100      reg:
101        minimum: 0
102        maximum: 7
103
104      vref-supply: true
105
106    additionalProperties: false
107
108    required:
109      - compatible
110      - reg
111      - vref-supply
112
113examples:
114  - |
115    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
116    #include <dt-bindings/power/r8a7791-sysc.h>
117
118    adc@e6e54000 {
119        compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
120        reg = <0xe6e54000 64>;
121        clocks = <&cpg CPG_MOD 901>;
122        clock-names = "fck";
123        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
124        resets = <&cpg 901>;
125
126        #address-cells = <1>;
127        #size-cells = <0>;
128
129        adc@0 {
130            reg = <0>;
131            compatible = "maxim,max1162";
132            vref-supply = <&vref_max1162>;
133        };
134
135        adc@1 {
136            reg = <1>;
137            compatible = "maxim,max1162";
138            vref-supply = <&vref_max1162>;
139        };
140    };
141...
142