1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Analog Devices ADXL367 3-Axis Digital Accelerometer 8 9maintainers: 10 - Cosmin Tanislav <cosmin.tanislav@analog.com> 11 12description: | 13 The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. 14 15 The ADXL367 does not alias input signals by to achieve ultralow power 16 consumption, it samples the full bandwidth of the sensor at all 17 data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, 18 with a resolution of 0.25mg/LSB on the +-2 g range. 19 20 In addition to its ultralow power consumption, the ADXL367 21 has many features to enable true system level power reduction. 22 It includes a deep multimode output FIFO, a built-in micropower 23 temperature sensor, and an internal ADC for synchronous conversion 24 of an additional analog input. 25 https://www.analog.com/en/products/adxl367.html 26 27properties: 28 compatible: 29 enum: 30 - adi,adxl367 31 32 reg: 33 maxItems: 1 34 35 interrupts: 36 maxItems: 1 37 38 spi-max-frequency: true 39 40 vdd-supply: true 41 vddio-supply: true 42 43required: 44 - compatible 45 - reg 46 - interrupts 47 48additionalProperties: false 49 50examples: 51 - | 52 #include <dt-bindings/interrupt-controller/irq.h> 53 54 i2c { 55 #address-cells = <1>; 56 #size-cells = <0>; 57 58 accelerometer@53 { 59 compatible = "adi,adxl367"; 60 reg = <0x53>; 61 interrupt-parent = <&gpio>; 62 interrupts = <25 IRQ_TYPE_EDGE_RISING>; 63 }; 64 }; 65 - | 66 #include <dt-bindings/interrupt-controller/irq.h> 67 68 spi { 69 #address-cells = <1>; 70 #size-cells = <0>; 71 72 accelerometer@0 { 73 compatible = "adi,adxl367"; 74 reg = <0>; 75 spi-max-frequency = <1000000>; 76 interrupt-parent = <&gpio>; 77 interrupts = <25 IRQ_TYPE_EDGE_RISING>; 78 }; 79 }; 80